Krober O2 - Page 95

Kröber O2 - Kröber O2 Vers. 4.0
Maintenance
EN 95
Replacing the air intake
filter
1 Open the service flap.
2 Pull the old air intake filter with a slight twist off the filter off the
filter holder.
3 Plug the new filter element on.
4 Close the service flap.
Checking the
equipment fuse
WARNING! Danger of electric current!
Before checking the fuse switch off the unit and pull the mains
plug out of the socket.
1 Open the service flap.
2 Apply slight pressure and turn the fuse cover anti-clockwise.
3 Remove the fuse.
4 Inspect the fuse visually.
5 If necessary replace the fuse with the same model and rating.
6 Reinstall the fuse.