What does ERR 3 mean on Kroger BP3NL1-1AKRO Blood Pressure Monitor?
If you receive an ERR 3 error on your Kroger Blood Pressure Monitor, it indicates that the cuff is not correctly seated, or the hose connection is not sealed, causing the inflation of the cuff to take too long.
What to do if Kroger BP3NL1-1AKRO Blood Pressure Monitor values are too low or too high?
If your Kroger Blood Pressure Monitor frequently fails to measure blood pressure, or the values are too low or high, ensure the cuff is correctly fitted on your arm. Also, make sure the cuff isn't too tight and that clothing isn't exerting pressure on your arm. If necessary, remove articles of clothing and measure your blood pressure again in a quiet environment.
How to fix a blank display on Kroger BP3NL1-1AKRO?
If the display of your Kroger Blood Pressure Monitor remains blank when switched on, even with batteries in place, first check the battery installation and polarity. If the display is unusual, remove the batteries and replace them with new ones.
Why pressure is not rising in Kroger BP3NL1-1AKRO?
If the pressure does not rise on your Kroger Blood Pressure Monitor even though the pump is running, check the connection of the cuff tube and connect it properly.
What does ERR 1 mean on Kroger BP3NL1-1AKRO?
If you receive an ERR 1 error on your Kroger Blood Pressure Monitor, it means the systolic pressure was determined, but afterwards the cuff pressure fell below 20 mmHg. This can happen if the tube becomes unplugged after measuring systolic blood pressure or if no pulse has been detected.
Defines the blood pressure monitor's purpose and user applicability for adults in home healthcare environments.
Lists conditions the device should not be used with and critical safety warnings for potential injury or death.
Lists specific actions to avoid during device operation, such as modifying, using on wounds, or with other equipment.
Highlights potential hazards and damage associated with the device's sensitive electronic components.
Details necessary precautions for operation and maintenance for accuracy and safety, including environment and batteries.
Lists the medical and electromagnetic standards the device adheres to, ensuring safety and performance.
Specifies device protection type (IP20), applied part, disposal guidelines, and expected lifespan for monitor and cuff.
Explains BHS accuracy grading and outlines the device's compliance with FCC rules.
Introduces the automatic blood pressure monitor, its features, and user-friendly design.
Explains the concept of blood pressure and factors influencing its fluctuations.
Provides guidelines on when blood pressure is considered too high or too low and when to consult a doctor.
Presents the standard categories for assessing blood pressure based on AHA/ACC guidelines.
Offers insights into labile hypertension and general advice for monitoring.
Details lifestyle changes related to diet, illness management, and habits for blood pressure control.
Provides recommendations on exercise after medical examination for blood pressure management.
Identifies and illustrates the main unit, its display, buttons, and the upper arm cuffs.
Step-by-step instructions for inserting the required AA batteries into the monitor.
Explains battery indicators and provides important notes on battery usage and replacement.
Instructions for correctly connecting the cuff tube to the monitor unit.
Outlines essential preparation steps before taking a blood pressure measurement, including relaxation and garment removal.
Identifies common errors encountered during measurement and their potential causes.
Detailed instructions on how to properly apply the blood pressure cuff to the arm for accurate readings.
Discusses cuff placement on the left or right arm and the importance of consistency for measurements.
Step-by-step guide on how to perform a blood pressure measurement using the device.
Explains the symbol for irregular heartbeat detection and when to consult a doctor.
Instructions on how to access and review the last stored measurement.
Describes how to interrupt a measurement in progress if the patient feels unwell.
Explains the battery indicators and procedures for replacing batteries.
Lists error codes, their possible causes, and recommended solutions for measurement issues.
Provides troubleshooting advice for common malfunctions not covered by error codes.
Instructions on how to properly clean and maintain the blood pressure monitor and cuff.
Details the warranty terms, coverage, and limitations for the blood pressure monitor.
Lists the detailed technical specifications of the blood pressure monitor, including ranges and dimensions.
Provides contact information for customer support, including phone and email.
General| Brand | Kroger |
|---|---|
| Model | BP3NL1-1AKRO |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page
