How to fix a blank display on Kroger BP3NP1-3EKRO Blood Pressure Monitor?
If the display of your Kroger Blood Pressure Monitor remains blank when you switch it on: * Check the batteries to ensure they are inserted with the correct polarity. * If the display appears unusual, try re-inserting the batteries or replacing them with new ones.
What to do if movement affects Kroger Blood Pressure Monitor reading?
If unnatural pressure impulses influenced the measurement result on your Kroger Blood Pressure Monitor because your arm was moved during the measurement, repeat the measurement while keeping still and quiet.
How to fix 'no pulse detected' error on Kroger BP3NP1-3EKRO Blood Pressure Monitor?
If no pulse is detected on your Kroger Blood Pressure Monitor, ensure the cuff is properly placed on the inside of your wrist and repeat the measurement.
What to do if Kroger BP3NP1-3EKRO Blood Pressure Monitor fails to measure values properly?
If your Kroger Blood Pressure Monitor frequently fails to measure blood pressure, or the values are too low or too high, first check the cuff positioning. Then, measure your blood pressure again in a quiet environment, carefully following the instructions in Section 5 of the manual.
Why does Kroger Blood Pressure Monitor give different readings every time?
If every measurement on your Kroger Blood Pressure Monitor shows a different value, review Section 5.2, "Common sources of error." Then, repeat the measurement. Remember that blood pressure naturally fluctuates, so some variability between successive measurements is expected.
What to do if cuff pressure is too high on Kroger BP3NP1-3EKRO Blood Pressure Monitor?
If the cuff pressure on your Kroger Blood Pressure Monitor is too high, relax for 5 minutes and then repeat the measurement.
What to do if systolic and diastolic readings are too different on Kroger BP3NP1-3EKRO?
If the measured readings on your Kroger Blood Pressure Monitor show an unacceptable difference between systolic and diastolic pressures, take another reading carefully following the directions. If you continue to get unusual readings, contact your doctor.
Why do Kroger BP3NP1-3EKRO Blood Pressure Monitor readings differ from doctor's office?
If blood pressure values measured at your doctor’s office differ from your measurements using Kroger Blood Pressure Monitor, record the daily development of your measured values and consult your doctor. Note that anxiety during doctor visits can result in higher readings compared to home measurements under resting conditions.
What to do if pulse is too low on Kroger BP3NP1-3EKRO?
If the pulse reading on your Kroger Blood Pressure Monitor is too low (less than 40), repeat the measurement.
Product compliance specifications, including IP rating and applied part type.
Estimated operational lifespan for the monitor and cuff components.
Overview of the automatic wrist blood pressure monitor features and benefits.
Explanation of the device's unique inflation process for measurement.
Explains the physiological factors influencing blood pressure readings.
Step-by-step guide to installing batteries correctly in the device.
Instructions for configuring the device's date and time settings.
Advice on body position and environmental factors for accurate readings.
Identifies frequent mistakes that can lead to inaccurate blood pressure readings.
General| Brand | Kroger |
|---|---|
| Model | BP3NP1-3EKRO |
| Category | Blood Pressure Monitor |
| Type | Upper Arm |
| Measurement Method | Oscillometric |
| Measurement Range (Pressure) | 0-299 mmHg |
| Accuracy (Pressure) | ±3 mmHg |
| Accuracy (Pulse) | ±5% |
| Memory | 60 readings |
| Display | LCD |
| Automatic Shut-off | Yes |
| Irregular Heartbeat Detection | Yes |
| Measurement Range (Pulse) | 40-180 beats/minute |
| Power Source | 4 AA Batteries |
To Next Page
