OPTIFLUX
2000/4000/5000
Electromagnetic
Flow Sensor
Flanged versions
for volumetric flowrate measurement
of electrically conductive liquids
General
Items supplied
In-depth information please consult the
handbook, data sheet, special manuals
and certificates supplied on CD-ROM.
Installation, assembly, commissioning and
servicing must only be undertaken by
trained personnel. Maintenance which is
considered relevant to safety in the sense
of explosion protection must only be
carried out by the manufacturer, his
agents or under the supervision of
experts.
Visual check
Example
For use in hazardous areas, special
codes and regulations are applicable,
which are supplied in a separate
document that describes all hazardous
area relevant information.
Responsibility as to suitability and
intended use of this device rests solely
with the user. The supplier does not
accept any liability resulting from misuse
by the customer. Improper installation and
operation may lead to loss of warranty. In
addition, the "General conditions of sale",
found on the back of the invoice and
forming the basis of the purchasing
contract, are applicable.
If you need to return the device to the
manufacturer or supplier, please complete
the form given on the CD-Rom and attach
to the device. KROHNE regrets that it
cannot repair or check your device unless
accompanied by this completed form.
only separate version
GR
© KROHNE 01/2005 7.30946.32.00
Liner materials
Electrode materials
PFA PFA HC4 Hastelloy C4
PTFE PTFE HB2 Hastelloy B2
PU Polyurethane Pt Platinum
Al
2
O
3
Fused aluminium oxide 316 Stainless steel
(ceramic) Ta Tantalum
ETFE ETFE Ti Titanium
PP Polpropylene HC4/LN LowNoise HC4
HR Hardrubber 316Ti / LowNoise, stainless steel
LN 1.4571
Quick Start