Need help?Do you have a question about the KROHNE OPTIMASS 7400C and is the answer not in the manual?
Details standards compliance and hazardous area certifications (ATEX, IECEx).
Explains the Ex markings applied to sensors, converters, and compact meters.
Covers important safety warnings and symbols used throughout the manual.
Details the procedure and specifications for replacing the power supply fuse.
Outlines procedures and requirements for returning devices for inspection or repair.
Provides a form to certify the device is safe to handle before returning.
Details standards compliance and hazardous area certifications (ATEX, IECEx).
Explains the Ex markings applied to sensors, converters, and compact meters.
Covers important safety warnings and symbols used throughout the manual.
Details the procedure and specifications for replacing the power supply fuse.
Outlines procedures and requirements for returning devices for inspection or repair.
Provides a form to certify the device is safe to handle before returning.
General| Device Type | Coriolis Mass Flowmeter |
|---|---|
| Model | OPTIMASS 7400C |
| Measuring Principle | Coriolis |
| Pressure Rating | up to 100 bar |
| Display | Optional |
| Material | Stainless Steel |
| Ingress Protection | IP67 |
| Accuracy | ±0.1% |
| Repeatability | ±0.05% of measured value |
| Output Signal | 4-20 mA, Modbus |
| Process Connection | Flanged |
| Power Supply | 24 V DC |
| Ambient Temperature Range | -40°C to +60°C |
To Next Page
