1 INTRODUCTION
4
OPTIMASS / 400
www.krohne.com 10/2022 - 4003491806- AD OPTIMASS 400 Atex R06 en
1.1 Scope of the document
These instructions are applicable only to the explosion protection version of the meter. For all
other data, use the Quick Start and Handbook. If you do not have these documents, please
contact the nearest sales office or download them from the manufacturer's website.
1.2 General
The OPTIMASS flowmeter system consists of a mass flow sensor and a flow converter, or a mass
flow sensor and associated equipment.
The separate mass flow sensor with a mass flow converter is identified as:
• OPTIMASS 1000F flow sensor with MFC 400F flow converter
• OPTIMASS 2000F flow sensor with MFC 400F flow converter
• OPTIMASS 3000F flow sensor with MFC 400F flow converter
• OPTIMASS 6000F flow sensor with MFC 400F flow converter
• OPTIMASS 7000F flow sensor with MFC 400F flow converter
The flowmeter in a compact configuration is identified as:
• OPTIMASS 1400C (OPTIMASS 1000 + MFC 400)
• OPTIMASS 2400C (OPTIMASS 2000 + MFC 400)
• OPTIMASS 3400C (OPTIMASS 3000 + MFC 400)
• OPTIMASS 6400C (OPTIMASS 6000 + MFC 400)
• OPTIMASS 7400C (OPTIMASS 7000 + MFC 400)
The OPTIMASS x000 is the general terminology for the OPTIMASS x000F
INFORMATION!
The information in these supplementary instructions only contains the data applicable to
explosion protection. The technical data for the non-Ex version in the Handbook shall be valid in
its current version, provided that it is not rendered invalid or replaced by these supplementary
instructions.
To Next Page
Loading...
Need help?
General
