Do you have a question about the Kroks Arinst SSA-TG R2 and is the answer not in the manual?
Displayed average noise level | -90 dBm |
---|---|
Frequency resolution | 1 kHz |
Dynamic range | 70 dB |
Input impedance | 50 Ohms |
VSWR at operating frequency range | < 1.5 |
Covers general and additional safety requirements for using the spectrum analyzer.
Details the main menu options and their respective functions for device control.
Instructions for setting the analysis frequency range using various methods.
Guides on adjusting amplitude scale, reference level, and input impedance.
Configuration for setting markers and identifying signal peaks for analysis.
Settings for the built-in signal generator, including frequency and power.
Procedure for measuring the S11 parameter using calibration methods.
Procedure for measuring the SWR using calibration methods.
Step-by-step guide to establish a connection between the analyzer and an Android device.
Overview of the main menu and navigation within the control application.
Identifies common device malfunctions and their recommended solutions.