Kroks Arinst SSA-TG R3 - User Manual

Версия документа от 19.07.2022
A complete instruction manual for the device is available on the website www.kroks.ru
Warranty
The manufacturer warrants that this product will meet the specifications in this document. The warranty period is 12 months
from the date of purchase. During this period, the manufacturer provides free warranty service.
Warranty obligations do not apply to the following cases:
 the warranty period of the product has expired from the date of sale;
 there are no documents confirming the date and fact of purchase of the product;
 the product intended for personal needs was used for commercial activities, as well as for other purposes that do not
correspond to its intended purpose;
 Violation of the rules and operating conditions set forth in the Operating Instructions and other documentation
transferred to the Buyer complete with the product;
 if there are traces of unskilled repairs or attempts to open the Product outside an authorized service center, as well as
due to unauthorized interference with the software;
 damages (shortcomings) of the Goods are caused by exposure to virus programs, software interference, or the use of
third-party software (non-original);
 the defect is caused by force majeure (for example, earthquake, fire, lightning strike, instability in the electrical
network), accidents, intentional or careless actions of the consumer or third parties;
 mechanical damage (cracks, chips, holes) that occurred after the transfer of the product to the Buyer;
 damage caused by exposure to moisture, high or low temperatures, corrosion, oxidation, ingress of foreign objects,
substances, liquids, insects into the product;
 the defect arose due to the supply to the input connectors, terminals, signal housing or voltage or current exceeding
the values allowed for this Product;
 the defect is caused by natural wear of the Goods (for example, but not limited to: natural wear of connectors due to
frequent connection/disconnection of adapters).
Warranty obligations apply only to defects caused by the fault of the manufacturer. Warranty service is performed by the manu-
facturer or an authorized service center.
Date of sale____________________ seller________________________________________
(store name or stamp)
Familiar with the instructions and operating rules ____________________________
(buyer's signature)
2425
Kroks Plus LLC
394005, Voronezh, Moskovsky pr. 133-263
+7 (473) 290-00-99
info@kroks.ru
www.kroks.ru
Arinst SSA-TG R3 portable spectrum analyzer with tracking generator
Manual. Passport products.
1. Purpose
Arinst SSA-TG R3 is a portable panoramic spectrum analyzer with a built-in tracking generator and demodulator de-
signed to display the spectral components of signals in the frequency range from 24 MHz to 12 GHz. High scanning
speed makes it possible to detect impulse signals of digital communication standards: Wi-Fi, 2G, 3G, 4G, LTE, CDMA,
DCS, GSM, GPRS, GLONASS, etc. The built-in tracking generator allows you to measure the frequency response of
passive or active devices, such as filters, amplifiers. Software demodulator of WFM/FM/AM signals is intended for
listening to the air and tuning analog radio transmitters. Setting the regional coverage frequencies of cellular operators
allows you to match the displayed signal with the corresponding operator. For convenience, the built-in software of the
device allows you to sign and highlight frequency ranges on the screen. For example, sign the names of radio stations,
Wi-Fi channels or frequency bands of mobile operators.
2. Device structure
1. Tracking generator output (TG OUT)
2. Headphone jack
3. Analyzer input (RF IN)
4. Touch screen
5. Status LED
6. On/off button
7. Battery charging LED
8. Mini-USB connector
9. Connector for external power supply
10. Speaker
Due to the constant improvement of the device and software, the manufacturer reserves the right to make
changes to its technical characteristics and completeness.

Summary

Product Warranty Information

Arinst SSA-TG R3 Product Overview

Purpose of the Analyzer

Describes the portable spectrum analyzer with built-in tracking generator for signal analysis and frequency response measurement across a wide range.

Device Structure and Components

Details the main physical components of the Arinst SSA-TG R3 spectrum analyzer, including ports, buttons, and the display interface.

Contents of Delivery and Specifications

Contents of Delivery

Lists the items included in the package for the spectrum analyzer and emphasizes checking completeness upon purchase.

Technical Specifications

Provides detailed technical parameters for the Arinst SSA-TG R3 spectrum analyzer, covering frequency, performance, and connectivity.

Enabling and Operating the Analyzer

Initial Setup and Charging

Guides users on initial checks, battery charging procedures, and recommended power supply specifications for optimal performance.

Turning On the Device

Instructions on how to power on the analyzer using the designated button and initial settings.

Turning Off the Device

Procedure for safely shutting down the spectrum analyzer, ensuring settings are saved to non-volatile memory.

Device Screen Interface

Screen Information and Controls

Explains the on-screen display elements, including spectrum graphs, markers, frequency fields, and interactive buttons for control.

Main Screen Components

Identifies and describes the primary components displayed on the analyzer's screen, such as marker fields and frequency axes.

Built-in Battery Status Indicator

Battery Charging and Status

Details the indicators for battery charging, full charge, low charge, and critical discharge levels for the device.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Arinst SSA-TG R3 is a portable panoramic spectrum analyzer with a built-in tracking generator and demodulator, designed to display the spectral components of signals in the frequency range from 24 MHz to 12 GHz. Its high scanning speed makes it possible to detect impulse signals of digital communication standards such as Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, and GLONASS.

Function Description

The device serves as a versatile tool for radio frequency analysis, offering a range of functionalities:

• Spectrum Analysis: The primary function is to display the spectral components of signals, allowing users to visualize and analyze the frequency content of various radio signals. This is particularly useful for identifying and characterizing signals from different communication standards.
• Tracking Generator: A built-in tracking generator enables the measurement of the frequency response of passive or active devices, such as filters and amplifiers. This feature is crucial for characterizing the performance of RF components.
• Demodulator: The software demodulator supports WFM, FM, and AM signals, allowing users to listen to over-the-air broadcasts and tune analog radio transmitters. This provides an auditory component to signal analysis.
• Regional Coverage Frequencies: The device allows for setting regional coverage frequencies of cellular operators, which helps in matching the displayed signal with the corresponding operator.
• Frequency Range Annotation: For enhanced usability, the device's built-in software allows users to sign and highlight specific frequency ranges on the screen, such as names of radio stations, Wi-Fi channels, or mobile operator frequency bands.

Important Technical Specifications

The Arinst SSA-TG R3 boasts a robust set of specifications that make it suitable for a wide range of applications:

• Frequency Range:
  • Displayed: 24 MHz - 12 GHz
  • Measured: 24 MHz - 9 GHz
• Maximum Span: Approximately 12 GHz
• Reference Generator: TXCO GPS, 26 MHz
• Frequency Resolution: Selectable from 25, 10, 5, and 2.5 kHz
• Noise Floor:
  • 24 MHz - 6.2 GHz: -110 dBm
  • 6.2 GHz - 9 GHz: -100 to -70 dBm
  • 9 GHz - 12 GHz: -70 dBm
• Scan Speed:
  • Maximum: 20 GHz/s
  • Minimum scanning time for full 12 GHz band: 0.6 s
• RF Input:
  • Gain with attenuator on: -15 dB
  • Gain with LNA on: +15 dB
  • Wave Impedance: 50 Ohm
  • SWR in operating frequency range: < 2.0
  • Maximum input power without attenuator and LNA: 0 dBm
  • Maximum input power with attenuator on: +15 dBm
  • Maximum input power with LNA enabled: -15 dBm
  • Maximum DC input voltage: 25 V
• Tracking Generator:
  • Measurement modes: fix., S21
  • Normalized output power level (24-6200 MHz): -8 dBm to -29 dBm
  • Normalized output power level (6.2-9 GHz): -14 dBm
  • Depth of power adjustment (24-6200 MHz): 21 dB
• Demodulator:
  • Demodulation types: WFM, FM, AM
  • Audio output: Speaker 2 W, headphones
• Display:
  • Screen type: Touch resistive, IPS
  • Screen resolution: 800x480
  • Graphs: Spectrum, Waterfall, S21
• Power:
  • Built-in battery capacity: 5000 mAh
  • Continuous battery life: Approximately 4 hours
  • External power supply: 7-24 V, 2 A
• Operating Temperature Range: 0 to +40°C
• Dimensions (LxWxH): 145x81x27 mm
• Weight: 0.4 kg

Usage Features

The Arinst SSA-TG R3 is designed for ease of use and portability:

• Power On/Off: The device is turned on or off by pressing and holding button (6) for 2 seconds. User settings are automatically saved to non-volatile memory upon power-off, ensuring that previous configurations are retained for subsequent use.
• Battery Charging: The device can be operated while charging, provided the power supply delivers at least 1500 mA. The CHARGE indicator turns off when charging is complete. For faster charging, industrial power supplies with a maximum output current of 3 A are recommended.
• Intuitive Interface: The instrument screen displays scan results as a spectrum graph, with current settings and interactive buttons located at the bottom for easy control. Key screen components include markers, frequency ranges, amplitude axis, scan parameters, and battery charge indicator.
• Connectivity: The device includes a Mini-USB connector for data transfer and charging, a connector for external power supply, and headphone and speaker outputs for audio demodulation.
• Portability: Its compact dimensions and light weight make it highly portable for field use.

Maintenance Features

Proper maintenance ensures the longevity and reliable operation of the Arinst SSA-TG R3:

• Environmental Precautions:
  • Avoid using the appliance outdoors during snowfall or rain.
  • If the analyzer is brought from a cold environment into a warm room, allow sufficient time for condensation to evaporate before turning it on.
• Input Power Management:
  • Do not switch the RF input jack while connected to a charger or USB connection to a PC, as this can damage the analyzer.
  • Ensure that the signal strength and voltage supplied to the RF IN input connector match the maximum specifications to prevent damage.
• Warranty: The manufacturer provides a 12-month warranty from the date of purchase, covering defects caused by the manufacturer's fault. Warranty service is performed by the manufacturer or an authorized service center.
• Warranty Exclusions: The warranty does not cover:
  • Expired warranty period.
  • Lack of purchase documentation.
  • Commercial use or use for purposes not corresponding to its intended purpose.
  • Violation of operating rules or instructions.
  • Traces of unskilled repairs, attempts to open the product outside an authorized service center, or unauthorized software interference.
  • Damage caused by virus programs, software interference, or the use of third-party software.
  • Defects caused by force majeure (e.g., earthquake, fire, lightning, electrical network instability, accidents, intentional or careless actions).
  • Mechanical damage (cracks, chips, holes) after product transfer to the buyer.
  • Damage due to exposure to moisture, extreme temperatures, corrosion, oxidation, ingress of foreign objects, substances, liquids, or insects.
  • Defects due to supply of voltage or current exceeding allowed values to input connectors, terminals, or signal housing.
  • Defects caused by natural wear of goods (e.g., wear of connectors due to frequent connection/disconnection).
• Completeness Check: It is crucial to check the completeness of the analyzer upon purchase, as claims for incompleteness are not accepted afterward.

The manufacturer reserves the right to make changes to the device's technical characteristics and completeness due to continuous improvements.

Kroks Arinst SSA-TG R3 Specifications