INSTALLATION
PC
1. Slide the rear switch to the PS3 position
2. Connect USB and hold the PS/Home button for 1 second to power on.
PS3
1. Slide the rear switch to the PS3 position
2. Connect USB and hold the PS/Home button for 1 second to power on.
PS4
1. Slide the rear switch to the PS4 position
2. Connect USB and hold the PS/Home button for 1 second to power on.
This gamepad is not compatible with games that require XINPUT (XBOX 360 compatible
controller). However, you can configure it through STEAM platform following this video:
https://drive.google.com/open?id=1SPFaQ9Uxmj51lVonu9auluys3QSKqI3V
If you want to play a game out of STEAM platform, follow these steps with
third-party software:
· We recommend that you download this software first:
https://drive.google.com/open?id=1VR_2rqRR3vZCM4fXZxF2LdOtHVy6n_QD
· Follow the instructions to configure the software after installation:
https://drive.google.com/open?id=1I3cnPWKaOdVvxwiqyH3lU7Y7H2_gJHW8
To Next Page
Loading...