14
The PTO shaft for the conditioner drive is mounted with
the friction clutch (1) towards the gearbox and the free-
running end (2) towards the conditioner. Attach the
retaining chain (3) to the mower.
2.5 The angle of the mower to the tractor
The adjustment of the angle of the mower to the tractor
can be made with the breakaway safety unit (1). Basic
setting is position (2).
The retaining chain should be inserted to
prevent the PTO shaft guard from
rotating with the shaft.
The PTO shaft must only be fitted or
removed when the power take-off shaft
and the engine are turned off and the
ignition key has been removed!
2.6 Preparing to turn
When preparing to turn the tractor, simply lift the disc
mower by means of the hydraulic cylinder on the
machine until the locking mechanism (1) rests against
the catch.
AM-1-083
1
AM-1-08
To Next Page
Loading...
