I - 2
General
1.2.6 Technical Data
1.2.5 Operation in Accordance with
Specifications
The rotary tedder is designed solely for normal
agricultural use (operation in accordance with
specifications).
Any use of the machine for other purposes is deemed to
be not in accordance with specifications. The
manufacturer bears no responsibility for any resulting
damage; such use is entirely at the operator´s risk.
Use in accordance with specifications also includes
adherence to the operating, maintenance and service
instructions prescribed by the manufacturer.
Type KW 5.50/4x7 T
Working width [mm] 5500
Number of swather discs 4
Tine arms per swather disc 7
Surface covered [appr. ha/hr] 5,5
Width in transport position [mm] 2930
Height in transport position [mm] 2800
Power consumption [KW/PS] ab 18 / 25
Max. allowable hydraulic pressure 200 bar
Pto shaft speed [max. rpm] 540
Weight [kg] 560
Equivalent continuous sound pressure level under 70 d B(A)
Tyres 16/6.50 x 8
Tyre pressure 1,5 / 2,0
Draw bar Standard equipment
Edge spreading mechansim [mech.] Standard equipment
Spreading angle adjustment 15° - 19°
Additional tine loss protection Special accessory
Lubricant quantities and lubricant types for the gearbox
The main gearbox of the rotary tedder has a permanent grease lubrication and operates without any
maintenance.
To Next Page
Loading...