Kronoterm KT-2A - 6.7 HEATING THE POOL; Pool Heating Loop Modes; Pool Temperature Setting; Pool ECO Mode Settings

24
6.7. HEATING THE POOL
Pool
Menu
Parameter name Parameter value range Note
Pool
heating loop
operational
mode
ON – Turn on
AUTO – Working schedule
OFF – Turn off
Setting the
pool loop
temperature
+15 °C to 40 °C Set the desired pool water temperature.
ECO pool mode –10 °C/+10 °C ECO lowering the pool temperature by the set value.
COMFORT pool
mode
–10 °C /+10 °C
COMFORT raising the pool temperature by the set
value.
Setting the
schedule
1–7 days
0–24 h
Weekly operational schedule.
N
If there is no KT-1/KT-2A thermostat, adaptive regulation is turned off. The KSM regulator calculates the
temperature of the water in the heating loop based on the heating curve with reference temperatures at −15 °C
and +15 °C.
For a constant water temperature in the heating system set the setting at -15°C and at +15°C to the same value.
Operating instructions
A System
17-19-45-6702-02