7
6 Alarm:
Warning – verify the meaning of the warning
code and take appropriate measures, it is not
necessary to call a service technician.
Error – verify the meaning of the error code
and call a service technician if necessary.
7 The heating loop’s circulation pump:
The heating loop’s circulation pump is
working.
4.2. SETTING THE DESIRED AMBIENT
TEMPERATURE
Press or to show the set ambient
temperature. The temperature is outlined in orange.
Set the desired ambient temperature by pressing
or
Confirm the change by pressing
or by waiting
8 seconds for it to confirm automatically.
4 THERMOSTAT
Home screen in thermostat mode:
1 A grey bar in the status line shows that the KT-
2A Controller is set on thermostat mode.
2 Ambient temperature.
3 Outside temperature.
4 Time.
4.1. STATUS LINE IN THERMOSTAT
MODE
5
1
6
2 4
7
3
1 Heating loop operational mode:
Heating loop is in NORMAL mode.
Heating loop is in ECO mode.
Heating loop is in COMFORT mode.
2 Quick heating DHW:
Quick heating function for DHW is activated.
3 Locking buttons:
Buttons are locked.
4 Heating loop operational mode:
ON – the heating loop is working constantly,
OFF – the heating loop is not working,
AUTO – the heating loop is working according to
schedule.
5 Annual inspection:
Notification for an annual inspection of your
heat pump – order an inspection.
Operating instructions
A System
17-19-45-6702-02
To Next Page
Loading...
Need help?
General