26
KH1510F / KH2015F / KH1613F / KH1520F
USE
Starting stages
1. Open the water supply cock (A).
2. Open the gun and keep it open for a few seconds to allow the air in the
pipes (B) to come out.
CAUTION: Grip the lance and the gun firmly with both hands.
3. Turn the start switch (C).
Stages to turn the machine off
1. Turn the off switch (A).
2. Open the spray gun (B) and hold it open for a couple of seconds so that
the water in the line drains out.
3. Close the spray gun (B).
4. Turn the off switch (C).
5. Disconnect the machine from the electric supply by removing the plug
from the power socket.
Grip the lance and the gun firmly with
both hands.
A new machine needs a short period for running in the motor/pump set.
Running in consists of operating the machine for no more than 1 hour and
waiting for 1 hour for it to cool down; this should be done for 4 or 5 times.
To Next Page
Loading...