KRUG+PRIESTER EBA 5255 - Page 40

-40-
If the cutting quality decreases:
• Check the cutting depth (see page 49).
• Check the cutting stick (see page 44).
• Replace or grind the blade (see page
40-49).
The blade cannot be ground if the blade
height is less than 83 mm/3,29 inches.
A new blade must be used.
 Purchasethenewbladefrom
 Krug&Priester,D-72336Balingenonly.
 Theblademayonlybegroundbya
 qualiedworkshoporfromthe
manufacturer Krug & Priester,
D -72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without
protection. Changing the blade may only
be performed by trained staff.
49
44
49
40
Blade and cutting stick replacement