Why does my Krups EA826E Coffee Maker not turn on when I press the power button?
If your Krups Coffee Maker won't turn on, check your fuses and plug sockets. Also, make sure both power plugs are fully inserted into the appliance and the socket.
Why is there water underneath my Krups EA826E Coffee Maker?
If water is collecting underneath your Krups Coffee Maker, wait 15 seconds after the coffee flow stops before removing the water tank to allow the machine to finish its cycle. Ensure the drip tray is correctly positioned and always in place, even when the appliance isn't in use. Check that the drip tray isn't full and avoid removing it during a cycle.
Why is my Krups EA826E Coffee Maker working but not dispensing any liquid?
If your Krups Coffee Maker is on but no liquid is coming out, check that the water container is correctly positioned and that the cord isn't jammed between the appliance and the water container.
What to do if my Krups EA826E detects a fault and a symbol appears?
If you see a fault symbol on your Krups Coffee Maker, switch it off, disconnect it, remove the filter cartridge, wait a minute, and then restart the machine.
How to make my Krups EA826E Coffee Maker espresso hotter?
If your Krups Coffee Maker isn't dispensing coffee hot enough, increase the coffee temperature in the Maintenance and settings menu. You can also warm your cup by rinsing it with hot water before brewing.
What happens if there's a power failure during a Krups Coffee Maker cycle?
If your Krups Coffee Maker experiences a power failure during a cycle, the appliance will automatically restart when the power is restored.
Why is the coffee from my Krups Coffee Maker too weak?
If the coffee from your Krups Coffee Maker is too lightly colored or weak: * Avoid using oily, caramelised or flavoured coffee. * Check that the coffee bean container has coffee and is dispensing correctly. * Decrease the drink volume and increase the drink strength. * Turn the coffee fineness knob to the left for finer grounds. * Use the 2 cups function to brew in two cycles.
Why does coffee dispense so slowly from my Krups EA826E?
If the coffee dispenses too slowly from your Krups Coffee Maker, turn the coffee fineness knob to the right for a coarser grind (this may depend on the coffee type). Run one or more rinsing cycles. You can also run a machine clean or change the Claris Aqua Filter System cartridge.
Why is the coffee grinder in my Krups EA826E making a strange noise?
If your Krups Coffee Maker coffee grinder is making a strange noise, disconnect the machine before investigating. Check for any foreign objects inside the grinder and try to remove them with a vacuum cleaner.
Why is the auto-cappuccino set on my Krups EA826E Coffee Maker not frothing milk?
If the auto-cappuccino set on your Krups Coffee Maker makes little or no froth, or doesn't take in milk: * Check that the accessory is correctly attached to the appliance; remove and replace it. * Ensure the flexible tube isn't blocked or pierced and is airtightly attached to the accessory. * Rinse and clean the accessory.
Explains the purpose of each button and knob on the appliance.
Steps for preparing single or double cups of espresso and coffee.
How to empty the coffee grounds collector, coffee drawer, and drip tray.
Procedure for rinsing the internal circuits of the coffee machine.
Step-by-step guide to perform the automatic cleaning cycle.
Step-by-step guide to perform the descaling cycle.
Provides solutions for common malfunctions like error symbols and power issues.
General| Brand | Krups |
|---|---|
| Model | EA826E |
| Category | Coffee Maker |
| Language | English |
To Next Page