What to do if the warning message is still displayed after emptying the coffee grounds collector in my Krups Coffee Maker?
If the warning message persists after emptying the coffee grounds collector and cleaning the coffee drawer on your Krups Coffee Maker, correctly replace the coffee drawer and the coffee grounds collector, following the on-screen instructions. Wait at least 8 seconds before replacing them.
Why is there water underneath my Krups EA8150?
If water is collecting underneath your Krups Coffee Maker, wait 15 seconds after the coffee flow stops before removing the water tank to allow the machine to finish its cycle. Ensure the drip tray is correctly positioned and always in place, even when the appliance isn't in use. Check that the drip tray isn't full and avoid removing it during a cycle.
Why is my Krups Coffee Maker working but not dispensing any liquid?
If your Krups Coffee Maker is on but no liquid is coming out, check that the water container is correctly positioned and that the cord isn't jammed between the appliance and the water container.
What to do if my Krups EA8150 detects a fault and a symbol appears?
If you see a fault symbol on your Krups Coffee Maker, switch it off, disconnect it, remove the filter cartridge, wait a minute, and then restart the machine.
How to make my Krups EA8150 Coffee Maker espresso hotter?
If your Krups Coffee Maker isn't dispensing coffee hot enough, increase the coffee temperature in the Maintenance and settings menu. You can also warm your cup by rinsing it with hot water before brewing.
What happens if there's a power failure during a Krups Coffee Maker cycle?
If your Krups Coffee Maker experiences a power failure during a cycle, the appliance will automatically restart when the power is restored.
What to do if water has leaked into the base of my Krups Kitchen Appliance during cleaning?
If water has leaked into the base of your Krups Kitchen Appliance during cleaning, allow the appliance to dry for 24 hours.
Why is my Krups Kitchen Appliance not frothing?
If your Krups Kitchen Appliance isn't frothing, it might be due to a missing or incorrectly positioned stirrer. Empty out the milk and reposition the stirrer to resolve this issue.
Why does the steam nozzle on my Krups EA8150 Coffee Maker make little or no milk froth?
If the steam nozzle on your Krups Coffee Maker makes little or no milk froth, ensure you are using fresh, very cold pasteurised or UHT milk for milk-based drinks. Use a cold container. If the issue continues, try a different brand of milk.
Why is the auto-cappuccino set on my Krups EA8150 Coffee Maker not frothing milk?
If the auto-cappuccino set on your Krups Coffee Maker makes little or no froth, or doesn't take in milk: * Check that the accessory is correctly attached to the appliance; remove and replace it. * Ensure the flexible tube isn't blocked or pierced and is airtightly attached to the accessory. * Rinse and clean the accessory.
General| Type | Automatic Espresso Machine |
|---|---|
| Pressure | 15 bar |
| Display | LCD |
| Color | Black |
| Power | 1450 watts |
| Water Tank Capacity | 1.7 liters |
| Bean Hopper Capacity | 260 g |
| Milk Frother | Steam nozzle |
| Special Features | adjustable coffee strength |
| Grinder | Built-in conical burr grinder |
To Next Page
