J
Joseph OwensSep 10, 2025
Why are there coffee grains in the drip tray of my Krups EA815 Coffee Maker?
- JJose PhillipsSep 12, 2025
This happens if coffee grains fall outside the percolation tank; this keeps the machine clean.
To Next PageTo Next PageWhy are there coffee grains in the drip tray of my Krups EA815 Coffee Maker?
This happens if coffee grains fall outside the percolation tank; this keeps the machine clean.
How to fix the auto-cappuccino setting on my Krups EA815 Coffee Maker?
If the auto-cappuccino setting makes little or no froth, or does not take in milk: * Check that the accessory is correctly attached to the appliance; remove it, then replace it. * Check that the flexible tube is not obstructed or pierced and that it is correctly attached to the accessory so as to make it airtight. * Rinse and clean the accessory.
What to do if the steam nozzle on my Krups EA815 is clogged?
If the steam nozzle seems partially or completely clogged, ensure that the opening in the end piece is not obstructed by milk residue or limescale. Unclog the holes with the needle supplied with your appliance.
What to do if the warning message on my Krups EA815 Coffee Maker is still displayed after emptying the coffee grounds collector?
If, after emptying the coffee grounds collector and cleaning the coffee drawer of your Krups Coffee Maker, the warning message is still displayed, correctly replace the coffee drawer and the coffee grounds collector, following the instructions on the screen. Wait at least 4 seconds before replacing them.
How to fix Krups EA815 steam nozzle not frothing milk?
If the steam nozzle on your Krups Coffee Maker makes little or no milk froth, ensure you are using very fresh, very cold pasteurized or UHT milk. Using a cold container is also advisable. If the results don't improve, try changing the brand of milk.
What happens if there is a power failure during a Krups EA815 cycle?
If a power failure occurs during a cycle with your Krups Coffee Maker, the appliance is automatically restarted when power is switched back on.
How to fix a Krups EA815 when the coffee grinder makes a strange noise?
If the coffee grinder in your Krups Coffee Maker makes a strange noise, disconnect the machine before investigating. Check for any foreign objects inside and try to remove them using a vacuum cleaner.
Why is the coffee from my Krups EA815 Coffee Maker too weak?
If the coffee is too lightly colored or too weak: * Avoid using oily, caramelized, or flavored coffee. * Check that the coffee bean container has coffee in it and that it is dispensing correctly. * Decrease the drink volume and increase the drink strength. * Turn the coffee fineness knob to the left to make the grounds finer. * Make the drink in two cycles by using the 2 cups function.
Why is the steam nozzle on my Krups EA815 Coffee Maker making a noise?
If the steam nozzle on your Krups Coffee Maker is making a noise, ensure that it's correctly attached to its corresponding end piece.
What to do if water is under my Krups Coffee Maker?
If you find water underneath the appliance: * Wait 15 seconds after the coffee has finished flowing before removing the water tank. * Ensure the drip tray is correctly positioned and always in place. * Make sure the drip tray is not full and is not removed during a cycle.
General| Type | Automatic Espresso Machine |
|---|---|
| Pressure | 15 bar |
| Display | LCD |
| Milk Frother | Yes |
| Color | Black |
| Power | 1450 watts |
| Programmable | Yes |
| Water Tank Capacity | 1.7 liters |
| Bean Hopper Capacity | 260 grams |
| Grinder | Conical Burr Grinder |
Steps to prepare the appliance before use, including water tank and bean container.
Instructions for the initial start-up and first rinsing cycle of the machine.
Guide to setting coffee strength, volume, and number of cups before brewing.
Steps and tips for frothing milk using the steam function for hot drinks.
Instructions for using the optional accessory to make cappuccinos or lattes.
Procedure for emptying and cleaning the grounds collector and drip tray to prevent overflow.
Instructions for performing the automatic rinsing cycle of the machine's internal circuits.
How to program the machine for automatic rinsing upon startup.
Detailed steps for running the machine's cleaning cycle.
Instructions for performing the descaling process to remove limescale.
Procedure for safely turning off the coffee machine at any time.
Guide to identifying and setting the water hardness for optimal performance.
Step-by-step instructions for installing and priming the water filter cartridge.
