Why does the steam nozzle on my Krups EA815 Coffee Maker make little or no milk froth?
For milk-based drinks using your Krups Coffee Maker, ensure you are using cold (39°F) pasteurized or UHT milk and a cold container. If the issue persists, consider trying a different brand of milk, as the milk temperature being too high can cause this problem.
What to do if water is under my Krups Coffee Maker?
If you find water underneath the appliance: * Wait 15 seconds after the coffee has finished flowing before removing the water tank. * Ensure the drip tray is correctly positioned and always in place. * Make sure the drip tray is not full and is not removed during a cycle.
Why is my Krups Coffee Maker dispensing coffee too slowly?
If the coffee dispenses too slowly: * Turn the coffee fineness knob to the right to make the grounds courser. * Run one or several rinsing cycles. * Run a machine clean. * Change the Claris Aqua Filter System cartridge.
What to do if my Krups Coffee Maker doesn't turn on?
If the appliance does not turn on, check your fuses and plug sockets. Also, check that the two power plugs are pushed in properly both on the appliance and at the socket.
What to do if no liquid is coming out of my Krups EA815 Coffee Maker?
If the appliance is working but no liquid is coming out, check that the water container is in the correct position and that the cord is not jammed between the appliance itself and the water container.
What to do if my Krups EA815 is working but not dispensing any liquid?
If your Krups Coffee Maker is not dispensing any liquid, ensure that the water tank is correctly placed and that the cord is not trapped between the appliance body and the water tank.
How to make my Krups EA815 espresso or coffee hotter?
If the espresso or coffee from your Krups Coffee Maker isn't hot enough, increase the coffee temperature in the Maintenance and settings menu. Before making the drink, warm the cup by rinsing it with hot water.
What to do if my Krups Coffee Maker detects a fault and a symbol appears?
If your Krups Coffee Maker detects a fault and a symbol appears, switch off and disconnect the machine, remove the filter cartridge, wait for a minute, and then restart the machine.
What to do if no steam comes out of the nozzle of my Krups EA815?
If no steam comes out of the nozzle of your Krups Coffee Maker, empty the tank and temporarily remove the filter cartridge. Fill the water tank with mineral water high in calcium (> 100 mg/l) and run successive steam cycles.
How to fix a Krups EA815 when the coffee grinder makes a strange noise?
If the coffee grinder in your Krups Coffee Maker makes a strange noise, disconnect the machine before investigating. Check for any foreign objects inside and try to remove them using a vacuum cleaner.
Steps to prepare the appliance before use, including water tank and bean container.
Instructions for the initial start-up and first rinsing cycle of the machine.
Guide to setting coffee strength, volume, and number of cups before brewing.
Steps and tips for frothing milk using the steam function for hot drinks.
Instructions for using the optional accessory to make cappuccinos or lattes.
Procedure for emptying and cleaning the grounds collector and drip tray to prevent overflow.
Instructions for performing the automatic rinsing cycle of the machine's internal circuits.
How to program the machine for automatic rinsing upon startup.
Detailed steps for running the machine's cleaning cycle.
Instructions for performing the descaling process to remove limescale.
Procedure for safely turning off the coffee machine at any time.
Guide to identifying and setting the water hardness for optimal performance.
Step-by-step instructions for installing and priming the water filter cartridge.
General| Type | Automatic Espresso Machine |
|---|---|
| Pressure | 15 bar |
| Display | LCD |
| Milk Frother | Yes |
| Color | Black |
| Power | 1450 watts |
| Programmable | Yes |
| Water Tank Capacity | 1.7 liters |
| Bean Hopper Capacity | 260 grams |
| Grinder | Conical Burr Grinder |
To Next Page
