To Next PageTo Next PageWhat to do if my Krups Coffee Maker doesn't turn on?
If the appliance does not turn on, check your fuses and plug sockets. Also, check that the two power plugs are pushed in properly both on the appliance and at the socket.
Why does the steam nozzle on my Krups EA815 Coffee Maker make little or no milk froth?
For milk-based drinks using your Krups Coffee Maker, ensure you are using cold (39°F) pasteurized or UHT milk and a cold container. If the issue persists, consider trying a different brand of milk, as the milk temperature being too high can cause this problem.
Why can I not run descaling on my Krups Coffee Maker?
The Krups Coffee Maker only requests a descaling cycle once it has made a certain number of drinks using steam.
How to unclog the steam nozzle on my Krups Coffee Maker?
If the steam nozzle on your Krups machine seems partially or completely clogged, make sure that the opening in the end piece is not obstructed by milk residue or limescale. Unclog the holes with the needle supplied with your appliance.
Why is there water underneath my Krups Coffee Maker?
If you find water underneath your Krups Coffee Maker, wait 15 seconds after the coffee has finished flowing before removing the water tank. Ensure the drip tray is correctly positioned and not full. The drip tray should always be in place, even when the appliance is not in use, and should not be removed during a cycle.
What to do if my Krups EA815 Coffee Maker does not turn on?
If your Krups Coffee Maker isn't turning on when you press the button, check your fuses and plug sockets. Also, ensure that both power plugs are fully inserted into the appliance and the socket.
What to do if the coffee grounds collector warning message is still displayed on my Krups Coffee Maker?
If, after emptying the coffee grounds collector, the warning message is still displayed on the screen, correctly replace the coffee grounds collector and follow the instructions on the screen. Wait at least 8 seconds before replacing them.
What to do if the steam nozzle on my Krups EA815 is clogged?
If the steam nozzle seems partially or completely clogged, ensure that the opening in the end piece is not obstructed by milk residue or limescale. Unclog the holes with the needle supplied with your appliance.
How to fix the auto-cappuccino setting on my Krups EA815 Coffee Maker?
If the auto-cappuccino setting makes little or no froth, or does not take in milk: * Check that the accessory is correctly attached to the appliance; remove it, then replace it. * Check that the flexible tube is not obstructed or pierced and that it is correctly attached to the accessory so as to make it airtight. * Rinse and clean the accessory.
General| Type | Automatic Espresso Machine |
|---|---|
| Pressure | 15 bar |
| Display | LCD |
| Milk Frother | Yes |
| Color | Black |
| Power | 1450 watts |
| Programmable | Yes |
| Water Tank Capacity | 1.7 liters |
| Bean Hopper Capacity | 260 grams |
| Grinder | Conical Burr Grinder |
Steps to prepare the appliance before use, including water tank and bean container.
Instructions for the initial start-up and first rinsing cycle of the machine.
Guide to setting coffee strength, volume, and number of cups before brewing.
Steps and tips for frothing milk using the steam function for hot drinks.
Instructions for using the optional accessory to make cappuccinos or lattes.
Procedure for emptying and cleaning the grounds collector and drip tray to prevent overflow.
Instructions for performing the automatic rinsing cycle of the machine's internal circuits.
How to program the machine for automatic rinsing upon startup.
Detailed steps for running the machine's cleaning cycle.
Instructions for performing the descaling process to remove limescale.
Procedure for safely turning off the coffee machine at any time.
Guide to identifying and setting the water hardness for optimal performance.
Step-by-step instructions for installing and priming the water filter cartridge.
