Why is the coffee grinder in my Krups EA8150 making a strange noise?
If your Krups Coffee Maker coffee grinder is making a strange noise, disconnect the machine before investigating. Check for any foreign objects inside the grinder and try to remove them with a vacuum cleaner.
Why does coffee dispense so slowly from my Krups Coffee Maker?
If the coffee dispenses too slowly from your Krups Coffee Maker, turn the coffee fineness knob to the right for a coarser grind (this may depend on the coffee type). Run one or more rinsing cycles. You can also run a machine clean or change the Claris Aqua Filter System cartridge.
Why is the coffee from my Krups Coffee Maker too weak?
If the coffee from your Krups Coffee Maker is too lightly colored or weak: * Avoid using oily, caramelised or flavoured coffee. * Check that the coffee bean container has coffee and is dispensing correctly. * Decrease the drink volume and increase the drink strength. * Turn the coffee fineness knob to the left for finer grounds. * Use the 2 cups function to brew in two cycles.
What happens if there's a power failure during a Krups Coffee Maker cycle?
If your Krups Coffee Maker experiences a power failure during a cycle, the appliance will automatically restart when the power is restored.
How to make my Krups EA8150 Coffee Maker espresso hotter?
If your Krups Coffee Maker isn't dispensing coffee hot enough, increase the coffee temperature in the Maintenance and settings menu. You can also warm your cup by rinsing it with hot water before brewing.
What to do if my Krups EA8150 detects a fault and a symbol appears?
If you see a fault symbol on your Krups Coffee Maker, switch it off, disconnect it, remove the filter cartridge, wait a minute, and then restart the machine.
Why is my Krups Coffee Maker working but not dispensing any liquid?
If your Krups Coffee Maker is on but no liquid is coming out, check that the water container is correctly positioned and that the cord isn't jammed between the appliance and the water container.
Why is there water underneath my Krups EA8150?
If water is collecting underneath your Krups Coffee Maker, wait 15 seconds after the coffee flow stops before removing the water tank to allow the machine to finish its cycle. Ensure the drip tray is correctly positioned and always in place, even when the appliance isn't in use. Check that the drip tray isn't full and avoid removing it during a cycle.
General| Type | Automatic Espresso Machine |
|---|---|
| Pressure | 15 bar |
| Display | LCD |
| Color | Black |
| Power | 1450 watts |
| Water Tank Capacity | 1.7 liters |
| Bean Hopper Capacity | 260 g |
| Milk Frother | Steam nozzle |
| Special Features | adjustable coffee strength |
| Grinder | Built-in conical burr grinder |
To Next Page
