Krups EA870810 Intuition User Manual

4140
ENGLISH
PREPARING COFFEE DIRECTLY
The stages of preparing the drink:
– Bean grinding
– Grind compaction
– Pre-infusion (at this point, several drops may fall into your cup)
– Percolation
For more information, refer to section 1 – 1ST USE, fig 1 to 14.
Once the machine is switched on, it automatically switches to a default drink selection.
You can make your first coffee!
GRINDER: ADJUSTING THE GRINDING FINENESS
You can adjust the strength of your coffee by adjusting the grinding fineness of the coffee
beans.
Varying the fineness of the grinding enables you to adapt to the different types of bean: a
highly roasted and rather oily bean will require a coarse grinding while a more lightly roasted
bean will be drier and will require a finer grinding. The finer the grinding, the more powerful
the flavour.
Roasting:
Light
(Blonde)
Medium
(Amber)
Mature
(Light
French)
Intense
(French)
Very
intense
(Dark
French)
Turn the setting button located in the bean container (I), depending on your bean type and
the strength of the desired flavour. This adjustment must be performed during grinding and
notch by notch. After 3 preparations you will notice a very distinct difference in taste.
Adjusting the coffee output
For all drink types you can raise or lower the coffee outputs according to the size of your
cup(s). Refer to section 2 – BEVERAGE SETTINGS, fig 7.
Stopping a drink mid-flow
Caution:
You can stop the preparation at any time by pressing the START/STOP button.
When a cycle is interrupted, it does not stop immediately. The machine will be
inaccessible for a period of time, which will be indicated by visual feedback.
TOUCHSCREEN INTERFACE
Our interface and its buttons light up intuitively way to facilitate the use of the machine and
to guide you.
Light status Meaning
Unlit button
The corresponding function is not selected/is
not accessible.
Press the pulsing light (dimly lit with
long flashes)
An action with the selected function is in
progress
Press the flashing light An action is in progress
Lit button/bright light The function is selected
INTUITIVE WARNING LIGHTS
Your machine is equipped with intelligent technology to make daily life easier. The machine
automatically detects and controls the levels of coffee beans, water and ground coffee.
When these containers must be filled or emptied, a warning light will notify you.
If maintenance is required, the “warning” LED
appears on the touchscreen interface and
one or more of the three light bars will be lit:
GETTING STARTED
INSTALLING THE APPLIANCE
Switching on and preparing the machine
Danger:
Connect the appliance to a grounded 230 V socket. Otherwise, you expose
yourself to fatal injuries due to the presence of electricity!
Respect the safety information in the “Safety information” leaflet.
Priming the machine allows the water circuits to be filled, so that the machine can operate.
Preheating and automatic rinsing will take place.
Intuitive warning light Action to be performed
Water container (U) The water tank is almost empty, it must be refilled. See 7
– REFILLING THE WATER TANK fig 1 to 7.
Coffee bean container (V) The coffee bean container is almost empty, it must be refilled.
See8
– REFILLING THE COFFEE BEAN CONTAINER, fig 1 to 8.
Coffee grounds collector
(W)
The collector is filled with coffee grounds, it must be emptied.
See 9
– EMPTY THE COFFEE GROUNDS COLLECTOR, fig 1 to 5.

Krups EA870810 Intuition Specifications

General

Brand	Krups
Model	EA870810 Intuition
Category	Coffee Maker
Language	English