2928
FR
EN
NLNOFIITELSKPLUKBG DEDASVESPTCSHURUROHR
FILTER AND WATER HARDNESS
WHAT IS THE PURPOSE OF THE WATER HARDNESS SETTING?
In order to avoid scale build-up in your machine and to optimise the quality of your coee, we advise you to adjust the water
hardness setting on your machine.
HOW TO SET THE WATER HARDNESS ON YOUR MACHINE?
SETTINGS
. Fill a glass of water.
.
Dip the water-hardness testing stick (8) supplied with the machine in your glass of water.
. Wait for 1 minute. The squares on the stick will change colour.
. Count the number of coloured squares. This indicates the hardness of the water, from 0 to 4.
. In the “Water Hardness” menu, press the corresponding number between 0 and 4.
. Press OK.
IF YOU RUN OUT OF WATERHARDNESS TESTING STICKS
If you need to repeat this operation, remember to adjust the water hardness setting according to the location of use or
information provided by your local water company, using the table below:
Degree of hardness
Classe 0
Very soft
Classe 1
Soft
Classe 2
Average hardeness
Classe 3
Hard
Classe 4
Very hard
° dH < 3° > 4° > 7° > 14° > 21°
° e < 3.75° > 5° > 8.75° > 17.5° > 26.25°
° f < 5.4° > 7.2° > 12.6° > 25.2° > 37.8°
Appliance setting 0 1 2 3 4
WHY INSTALL A FILTER CARTRIDGE?
The Claris Aqua Filter System cartridge optimises the taste of coee, and reduces scaling and maintenance.
WHEN SHOULD I CHANGE THE CLARIS AQUA FILTER SYSTEM CARTRIDGE?
1. Two months after set-up or when your machine noties you.
2. When changing the cartridge, we recommend that you turn the grey ring on the top of the lter cartridge
to indicate the date + two months.
HOW DO I INSTALL THE CLARIS AQUA FILTER SYSTEM CARTRIDGE?
MAINTENANCE
. Place the cartridge in the water container.
. Position the cartridge, numbered ring facing up.
. Use the black tightening accessory, supplied with the cartridge, to position and screw the cartridge in
place.
GRINDER: ADJUSTING THE FINENESS OF THE GROUND COFFEE
WHY SHOULD I ADJUST THE FINENESS OF THE GROUND COFFEE?
You can choose the strength of your coee by adjusting how nely the coee beans are ground.
Varying the neness of the grinding enables you to adapt to the dierent types of bean:
. Darkly roasted and oily beans require coarse grinding,
. A more lightly roasted bean will be drier and will require ner grinding.
Note: the more nely the beans are ground, the more powerful the aroma.
Light
Roasting:
(Blonde)
Medium
(Amber)
Mature
(Light
French)
Intense
(French)
Very
intense
(Dark
French)
HOW DO I ADJUST THE FINENESS OF THE GROUND COFFEE?
Turn the grinding neness adjustment button (K) located in the bean container, depending on the type of bean and the desired
strength of aroma. This adjustment must be performed when the mill is in operation, notch by notch. After three preparations,
you will notice a distinct dierence in taste.
HOW DO I KNOW WHEN THERE ARE NO MORE BEANS IN THE CONTAINER?
Your Intuition machine has a sensor to warn you when the level of coee beans in the container is running low.
A message will appear on the screen and the Intuitive Light Indicator (J) will display red light.
WHAT IF THE ALERT APPEARS WHILE I’M MAKING A DRINK?
Fill the coee bean container, press OK and the recipe will resume. So no coee is wasted!
WHAT DO I DO IF I WANT TO CHANGE MY COFFEE OR IF I HAVE RUN OUT OF COFFEE?
If you press OK without adding coee beans, the machine will try to restart and alert you again. If you press OK again, the
machine will make the recipe using all of the remaining coee. The grinder will then be empty.
Caution: We do not recommend using oily and caramelised beans that are dicult for the grinder to process. These can
damage the machine and prevent the intuitive system from functioning correctly.
If an alert message appears on your screen and the red light comes on when there are enough beans:
. Press the OK button to continue the recipe.
. Or, turn o the “no bean” alert to prevent detection while there is still coee in the coee bean container.
SETTINGS
To Next Page
Loading...
Need help?
General
