S
sriveraSep 23, 2025
Why does my Krups EVIDENCE EA891D Coffee Maker not request descaling?
- CChris PerrySep 23, 2025
The descaling cycle of your Krups Coffee Maker is requested after the steam circuit has been used a significant number of times.
To Next PageTo Next PageWhy does my Krups EVIDENCE EA891D Coffee Maker not request descaling?
The descaling cycle of your Krups Coffee Maker is requested after the steam circuit has been used a significant number of times.
How to fix Krups EVIDENCE EA891D Coffee Maker dispensing coffee too slowly?
If the coffee dispenses too slowly from your Krups Coffee Maker, turn the ‘fineness of grind’ adjustment dial to the right to make the ground coffee coarser (depending on the coffee type). You can also run one or several rinsing cycles, run a machine clean, or change the Claris Aqua Filter System cartridge.
Why is there water under my Krups EVIDENCE EA891D?
If there is water underneath your Krups Coffee Maker, wait for 15 seconds after the coffee has finished flowing before removing the water tank, allowing the appliance to finish its cycle. Check that the drip tray is correctly positioned and always in place, even when the appliance is not in use. Ensure the drip tray is not full and avoid removing it during a cycle.
How to clean blocked steam nozzle on Krups EVIDENCE EA891D Coffee Maker?
If the steam nozzle on your Krups Coffee Maker seems to be partially or completely blocked, dismantle the nozzle from its support using the dismantling key. Replace the support without the nozzle and start the rinse cycle for the One Touch Cappuccino block to remove any remaining deposits. Clean the steam nozzle, ensuring that the opening is not obstructed by milk or limescale. Use the cleaning needle if necessary.
What to do if my Krups EVIDENCE EA891D Coffee Maker displays a failure?
If your Krups Coffee Maker displays a failure, hangs, or malfunctions, switch it off, unplug it, remove the filter cartridge, wait one minute, and restart it by pressing and holding the on/off button for at least 3 seconds.
Why can't I get an extra shot on my Krups EVIDENCE EA891D?
If, after preparing a drink, you ask for an extra shot and the Krups Coffee Maker tells you that this is not possible, the coffee grounds collector is full, and the extra shot function is not available. After making your drink, you can prepare an espresso after emptying the coffee grounds collector.
What to do if I put ground coffee in my Krups EVIDENCE EA891D Coffee Maker?
If you have used ground coffee instead of coffee beans in your Krups Coffee Maker, use your vacuum cleaner to remove the ground coffee from the coffee bean container.
Why is there ground coffee in the drip tray of my Krups EVIDENCE EA891D?
If some ground coffee has found its way into the drip tray of your Krups Coffee Maker, note that a small amount of ground coffee may settle there. The machine is designed to evacuate any excess ground coffee so that the percolation zone remains clean.
Why does my Krups Coffee Maker still say to empty grounds?
If, after emptying the coffee grounds collector, the warning message is still displayed on the screen of your Krups Coffee Maker, correctly replace the coffee grounds collector and follow the instructions on the screen. Wait at least 5 seconds before replacing them.
How to make Krups EVIDENCE EA891D Coffee Maker espresso hotter?
If the espresso or coffee from your Krups Coffee Maker is not hot enough, run a coffee circuit rinsing cycle before preparing your coffee. You can also increase the coffee temperature in the Settings menu or warm the cup by rinsing it with hot water before making the drink.
General| Brand | Krups |
|---|---|
| Model | EVIDENCE EA891D |
| Category | Coffee Maker |
| Language | English |
Explanation of warning symbols and icons used throughout the manual for safe operation.
List of components and accessories included with the espresso machine for initial setup and operation.
Key technical specifications of the Espresso Automatic EA89 Series, including power, dimensions, and weight.
Diagram and identification of the main external parts and components of the coffee machine.
Description of the function and operation of each control button on the appliance's interface.
Steps for initial setup and connection, including safety precautions and first-time operation guidance.
Configuration options for language, units, date/time, auto-off, rinsing cycles, and filter installation.
Instructions for inserting and setting the water filter cartridge into the appliance's water tank.
Guidance on testing water hardness and setting the appliance accordingly for optimal performance and maintenance.
Steps to ready the machine for use, including filling the water tank and coffee bean container.
Instructions on how to adjust the coffee bean grinding fineness for desired coffee strength and cream.
Guidance on modifying the height of the coffee dispensing spout to match different cup sizes.
Basic steps for preparing coffee drinks directly, including placing cups and pressing the desired drink button.
Adjustments available during coffee preparation, such as strength, adding an extra shot, and cup quantity.
How to interrupt a brewing cycle at any time using the return button and understanding the machine's response.
Instructions on how to prepare two cups of coffee simultaneously using the double preparation feature.
How to activate and deactivate the 'DARK' function to increase coffee strength and intensity.
How to add an extra espresso shot to a selected drink for enhanced flavor and strength.
Detailed steps for preparing milk-based drinks, including milk frothing and coffee dispensing.
Procedure for rinsing the milk system components to maintain hygiene and froth quality.
Options for customizing tea preparation, including volume adjustment and adding an extra shot.
Step-by-step guide for selecting and brewing different types of tea using the machine.
Instructions for preparing a short, intense espresso (Ristretto), including grinding and brewing steps.
Steps for preparing a double espresso (Doppio), similar to Ristretto but with a double coffee cycle.
Procedure for preparing an Americano, which involves espresso followed by hot water.
Guide to frothing milk using steam for various recipes, including customizing froth time.
Instructions for rinsing the milk system block after use to ensure cleanliness and optimal performance.
Configuration options including date, clock, language, screen brightness, temperature, water hardness, auto-on/off, and rinsing.
Guide to cleaning milk systems, coffee circuits, and descaling the appliance for optimal performance.
Information on filter usage and mode, especially for hard water conditions.
Accessing usage statistics, cleaning reminders, and filter replacement indicators.
Instructions for emptying the coffee grounds collector and the drip tray as prompted by the machine.
Procedure for manually initiating rinsing cycles for the machine's internal circuits.
Steps for running the automatic cleaning program for the coffee circuit using a cleaning tablet.
Procedure for cleaning the 'One Touch Cappuccino' block and its components.
Instructions for performing the automatic descaling program for the steam circuit.
