Why does my Krups Coffee Maker still say to empty grounds?
If, after emptying the coffee grounds collector, the warning message is still displayed on the screen of your Krups Coffee Maker, correctly replace the coffee grounds collector and follow the instructions on the screen. Wait at least 5 seconds before replacing them.
Why does my Krups Coffee Maker not switch on?
If your Krups Coffee Maker does not switch on when you press the ON/OFF button (for at least 3 seconds), check your fuses and plug sockets. Also, ensure that the two power plugs are correctly inserted into the socket.
How to make Krups EVIDENCE EA891D Coffee Maker espresso hotter?
If the espresso or coffee from your Krups Coffee Maker is not hot enough, run a coffee circuit rinsing cycle before preparing your coffee. You can also increase the coffee temperature in the Settings menu or warm the cup by rinsing it with hot water before making the drink.
What to do if my Krups EVIDENCE EA891D asks to be unplugged?
If your Krups Coffee Maker asks to be unplugged and plugged back in again, unplug it for 20 seconds, remove the Claris Aqua Filter System cartridge if necessary, and then plug it back in again. If the error persists, contact the KRUPS Customer Service team.
Why is there no steam coming out of my Krups EVIDENCE EA891D?
If no steam comes out of the steam nozzle of your Krups Coffee Maker, make sure that the steam nozzle is not blocked. If this does not work, empty the water tank, remove the Claris cartridge temporarily, fill the water tank with mineral water with high calcium content (>100 mg/l) and run steam cycles (5 to 10) consecutively into a container until you obtain a continuous jet of steam. Then, put the cartridge back in the tank.
Why is the Krups EVIDENCE EA891D Coffee Maker cappuccino block not frothing milk?
If the One Touch Cappuccino block on your Krups Coffee Maker isn't sucking milk or produces little to no froth: * Check that the block is correctly assembled, especially the connector in the milk tube. * Ensure the steam nozzle isn't blocked. * Check the connector for blockages; soak it in hot water and washing-up liquid, then rinse and dry. * Ensure the flexible pipe isn't blocked or twisted and is properly inserted into the One Touch Cappuccino block to avoid air leaks. * Ensure it's fully immersed in the milk. * Rinse and clean the block. * Use fresh, pasteurised or UHT milk which has been recently opened and a cold container.
What to do if Krups Coffee Maker still says water tank is empty?
If the water tank full warning message is still displayed on the screen of your Krups Coffee Maker, check that the tank is correctly installed on the device and that the float at the bottom of the tank moves freely. Unblock the float if necessary.
What to do if my Krups EVIDENCE EA891D Coffee Maker displays a failure?
If your Krups Coffee Maker displays a failure, hangs, or malfunctions, switch it off, unplug it, remove the filter cartridge, wait one minute, and restart it by pressing and holding the on/off button for at least 3 seconds.
How to clean blocked steam nozzle on Krups EVIDENCE EA891D Coffee Maker?
If the steam nozzle on your Krups Coffee Maker seems to be partially or completely blocked, dismantle the nozzle from its support using the dismantling key. Replace the support without the nozzle and start the rinse cycle for the One Touch Cappuccino block to remove any remaining deposits. Clean the steam nozzle, ensuring that the opening is not obstructed by milk or limescale. Use the cleaning needle if necessary.
Why is there water under my Krups EVIDENCE EA891D?
If there is water underneath your Krups Coffee Maker, wait for 15 seconds after the coffee has finished flowing before removing the water tank, allowing the appliance to finish its cycle. Check that the drip tray is correctly positioned and always in place, even when the appliance is not in use. Ensure the drip tray is not full and avoid removing it during a cycle.
Explanation of warning symbols and icons used throughout the manual for safe operation.
List of components and accessories included with the espresso machine for initial setup and operation.
Key technical specifications of the Espresso Automatic EA89 Series, including power, dimensions, and weight.
Diagram and identification of the main external parts and components of the coffee machine.
Description of the function and operation of each control button on the appliance's interface.
Steps for initial setup and connection, including safety precautions and first-time operation guidance.
Configuration options for language, units, date/time, auto-off, rinsing cycles, and filter installation.
Instructions for inserting and setting the water filter cartridge into the appliance's water tank.
Guidance on testing water hardness and setting the appliance accordingly for optimal performance and maintenance.
Steps to ready the machine for use, including filling the water tank and coffee bean container.
Instructions on how to adjust the coffee bean grinding fineness for desired coffee strength and cream.
Guidance on modifying the height of the coffee dispensing spout to match different cup sizes.
Basic steps for preparing coffee drinks directly, including placing cups and pressing the desired drink button.
Adjustments available during coffee preparation, such as strength, adding an extra shot, and cup quantity.
How to interrupt a brewing cycle at any time using the return button and understanding the machine's response.
Instructions on how to prepare two cups of coffee simultaneously using the double preparation feature.
How to activate and deactivate the 'DARK' function to increase coffee strength and intensity.
How to add an extra espresso shot to a selected drink for enhanced flavor and strength.
Detailed steps for preparing milk-based drinks, including milk frothing and coffee dispensing.
Procedure for rinsing the milk system components to maintain hygiene and froth quality.
Options for customizing tea preparation, including volume adjustment and adding an extra shot.
Step-by-step guide for selecting and brewing different types of tea using the machine.
Instructions for preparing a short, intense espresso (Ristretto), including grinding and brewing steps.
Steps for preparing a double espresso (Doppio), similar to Ristretto but with a double coffee cycle.
Procedure for preparing an Americano, which involves espresso followed by hot water.
Guide to frothing milk using steam for various recipes, including customizing froth time.
Instructions for rinsing the milk system block after use to ensure cleanliness and optimal performance.
Configuration options including date, clock, language, screen brightness, temperature, water hardness, auto-on/off, and rinsing.
Guide to cleaning milk systems, coffee circuits, and descaling the appliance for optimal performance.
Information on filter usage and mode, especially for hard water conditions.
Accessing usage statistics, cleaning reminders, and filter replacement indicators.
Instructions for emptying the coffee grounds collector and the drip tray as prompted by the machine.
Procedure for manually initiating rinsing cycles for the machine's internal circuits.
Steps for running the automatic cleaning program for the coffee circuit using a cleaning tablet.
Procedure for cleaning the 'One Touch Cappuccino' block and its components.
Instructions for performing the automatic descaling program for the steam circuit.
General| Brand | Krups |
|---|---|
| Model | EVIDENCE EA891D |
| Category | Coffee Maker |
| Language | English |
To Next Page