"
Problem:
Notenough frothwhen
frothingmilk.
Cause:
. Steam nozzle is clogged.
. Milkis not fresh.
. The pitcher that you are
using is not suitable.
(Itis recommended that
you use a(j)tainless steel
frothing pitcher.) Cold
conducts better to metal
than to glass or plastic.
. The type of milkis not
suitable.
We recommend using
2% or skim milk.Whole
milkis acceptable, but
due to the fat molecules,
itwillnot have as dense
a froth,as ifyou were to
use 2% or skim milk.
KRUPSLIMITEDONEYEAR
WARRANTY
YourKRUPSproduct is covered by the
followingwarranty ( broken glass jars are
excluded fromwarranty):
Ifwithinone year from the date of
purchase, this KRUPSproducts failsto
function because of defect in materials or
workmanship, KRUPSNorth America,
Inc. will,at its option, repair or replace
the unitwithout charge, provided the
owner returns:
. the KRUPSproduct
(securely packed) and
. Proofof date of purchase to:
KRUPSConsumerService
KRUPSNorthAmerica, Inc.
7 Reuten Drive
Closter, NJ 07624
To assure prompt service, please include
a letter indicating the specific cause for
returning your KRUPS product. Do not
return any glass jars or other loose
parts, or any accessories which are not
defective with your appliance to avoid
damage and loss in transit.
This warranty will be void ifmalfunction
or damage was caused to the product by
accident, misuse or voltage other than
marked on the product and/or described
in the instructions, abuse including
tampering, damage in transit or use for
commercial purposes.
This warranty gives you specific legal
rights, and you also may have other
rights which vary from state to state.
14
it
tl
2)
~ B
'J~ ~
...
0
-
...
Q)
a..
-
0
Q)
Q)
-
s::
tV
...
tV
;j
G
C/)
a..
::>
a:
~
c
s::
tV
...
...
tV
3:
oX
0
0
m
s::
0
U
;j
...
-
U)
s::
~
To Next Page
Loading...
