"
6. Tumthe three way
selector switch back to
the "..a" position to
finishmaking the
espresso.
7. Pour the espresso into a
cup which has a capa-
city of at least 5 ounces.
Add the steamed milkto
the espresso and spoon
on the frothed milk The
proportion between
espresso and milkis to
taste; inItalyit is nor-
mally1part espresso to
2 parts milkplus froth.
Steam Only
Ifyou onlywant to froth
milk,fillthe glass carafe
withwaterupto the "«!;)"
mark Thiswillgive you
approximately one minute
of steaming.
1. Pourthe water into the
water chamber and tum
the selector switch to
the" «!;)" position.
~ Place a cup under the
steam nozzle to collect
any water which may
escape. As soon as you
start seeing steam,
move the selector
switch to the "0" posi-
tion.
3. Nowfollowsteps 2-7
and when finished froth-
ingthe milkreturn to "0"
position.
AlTENTION
The top closure of the Per-
fect Froth attachment (see
figure 14,part A)has a very
fine hole which draws air
into the milk Ifthis tiny hole
gets clogged, "Perfect
Froth" willnot work pro-
perly. Therefore, never
immerse the top closure in
milk
or froth.
CLEANING
Before cleaning, turn "off'
the machine, unplug it, and
allow it to cool down.
The filter holder, filter bas-
ket, carafe, carafe lid, and
overflow grid can be put in
the dishwashers upper
rack, away from the heat-
ing/drying element.
The machine can be wiped
clean by using a damp
cloth. Never immerse the
body of your "ILGaffe.
Grande" in water or any
other liquid. Clean the
brewing head with }idamp
cloth and remove ~round
coffee. If there is water left
in the boiler chamber, let
the machine cool down,
remove all loose parts and
empty through the top
opening by tuming upside
down.
Cleaning The Steam
Nozzle
Clean the steam nozzle
each time after you have
immersed it in the milk,
otherwise the inside of the
nozzle becomes clogged
and the milk deposits on
the outside harden and
become difficult
to remove.
Ifclogging does occur,
unscrew the tip' of the
steam nozzle (see figure
15). Remove all milk par-
ticles using a sewing
needle and rinse under the
faucet. Replace nozzle tip
making sure to screw it on
tightly.
Wipe offthe outside of the
nozzle with a wet cloth.
Holdthe wet cloth very
close to the tip of the
nozzle and turn
the selector
switch to the"@". Let the
steam escape into the wet
cloth for one or two
seconds. Any milk residue
will then be flushed
out.
Then return to the "0" posi-
tion.
Cleaning The Perfect Froth
Attachment
For a thorough cleaning of
the "Perfect Froth" attach-
ment, remove part C (see
figure 14).All parts should
be rinsed'in warm water. If
the small suction opening in
part A is clogged up, it can
be opened with afine
needle.
Cleaning The Drip Tray
The overflow grid can be
cleaned by removing the
grid (see figure 16).
CAUTION
DO NOT try to open or
disassemble the main body
of the machine.
To Next Page
Loading...
