Krups Nescafe Dolce Gusto Genio S Touch - Espresso Boost Function

8
3. KEY FEATURES
3. 3 ESPRESSOBOOST
Boostthe taste intensity of your Espressos.
ESPRESSO BOOST cannot be selected in cold mode.
Do not use ESPRESSO BOOST with milk, chocolate
and tea capsules.
1
Check the number of bars shownon the capsule. Prepare
ESPRESSO BOOST for capsules identified with level 1, 2 & 3
only.
~5 – 10 s
2
Touch the ESPRESSO BOOST icon to switch to
ESPRESSOBOOST. The temperature selection icon blinks
while the machine is heating up for approximately 5–10
seconds. Afterwards, the temperature selection icon lights
steady red. The machine is ready to be used.
3
Use the touch volume selector to illuminate the amount of
bars in accordance with the number of bars shownon the
capsule, or select the amount of bars to your own taste
(max level 3).
4
Touch the start/stop icon. The beverage preparationstarts.
Do not open the locking handle during the extraction.
~10 s
5
Pre-wetting:The preparation pauses and the ESPRESSO
BOOST icon starts blinking. After approx. 10 seconds the
preparation continues and the ESPRESSO BOOSTicon is
steady green. Wait until the machine stops automatically.
The extraction can be stopped at any time manually by
pressing the start/stop icon.
6
Enjoy your beverage!