25
1 Ensure the machine is switched on.
Empty the pod bin to reset the
beverage counter. If the button
flashes white but the pod bin is
not full, this is due to emptying
the pod bin while the machine was
switched o.
The start button flashes white rapidly:
is the pod blocked or the pod bin full?
1
2
ALERTS / TROUBLESHOOTING
2 Insert the pod bin into the machine.
If the start button still flashes white,
check the pod inlet. The pod may
be blocked / trapped inside the
machine.
3 Open the slider and use a spoon to
either pull the pod up or push it into
the pod bin.
Never put your fingers inside the
pod inlet or in the hole of the pod
bin.
To Next Page
Loading...
