13
7
Insert a capsule with the dome shape facing downward.
NOTE:
To avoid damaging the machine, use only fresh,
unused capsules. Ensure previous capsule has been ejected before
inserting a fresh one.
9
Push the buon to start the brewing process. Green light will rotate
slowly during the barcode reading and pre-weing phase.
10
During the coee preparation phase coee will start to flow. GREEN
light will rotate quickly during brewing.
Steady GREEN light indicates that coee brewing is ready.
NOTE:
You can do this even when the machine is still heating up.
The coee will then flow automatically when the machine is ready.
The machine will automatically recognize the inserted capsule and select
the coee preparation parameters and cup length defined by Nespresso
coee experts to extract the coee blend at its best.
8
Push the lever down to close the
machine head.
11
To stop the coee flow early, push the
buon.
Steady GREEN light indicates that coee
brewing is ready.
11065_UM_ARES_C_Krups.indd 13 16.05.17 14:03