Krups Nespresso Vertuo Plus

EN
15
3
Push and hold the
buon until desired
volume is reached.
4
Water volume level is now stored for the capsule size
used for the programming.
PROGRAMMING THE WATER VOLUME
1
The programming is specific to each capsule
size, Alto, Mug, Gran Lungo or Espresso. Cup
sizes can be reprogrammed from 10 ml to 500
ml.
2
Open the machine head by pressing the lever upwards; Insert the capsule blend you
want to program; Close the head by pushing the lever down.
NOTE: Once a customer-specific volume is programmed by the user, every
time that capsule size is inserted in the machine, the preparation will stop at the user-
programmed cup size. It is possible to restore cup size volumes; refer to "Reset to
factory seings" section.
11065_UM_ARES_C_Krups.indd 15 16.05.17 14:03