Krups Nespresso Vertuo Plus

3 sec.
EN
21
12
When ready, push the buon to rinse the machine. Machine will stop automatically when complete.
ORANGE light blinking once every 2 seconds confirms the descaling process is completed. The procedure
can be stopped at any time by pushing the buon.
13
To exit descaling mode,
press the buon and the
lever down at the same
time for 3 seconds.
14
GREEN steady light
when ready.
15
Descaling is completed. Allow the
machine to dry for 10 minutes before
using it.
16
The machine is now ready for use.
NOTE: This machine is equipped with a descaling alert: GREEN and RED steady
light. Machine can only be operated to make coee a few more times once the alert appears
before descaling becomes mandatory. If the machine is completely scaled, the descaling
program may not function and the machine will stop and blink. Pause the program in this case
for several minutes, allowing the descaling agent to penetrate the scale build-up, then push the
buon again to restart the descaling.
11065_UM_ARES_C_Krups.indd 21 16.05.17 14:03