English
15
CLEANING YOUR APPLIANCE
n Unplug the appliance and remove the bowl or accessories.
n The blades and accessories are sharp, handle them with care.
n To facilitate cleaning, the blade unit (D1) can be detached from the bowl (D4) by pressing on the click
button (D2) (fig 8a 8b 8c).
n The bowl (D) the accessories (E) and (F) can be washed in the top basket of the dishwasher using the
"ECO" or "LIGHT WASH" programme.
n To clean the motor unit (A), use a damp cloth and dry it carefully. Never immerse the motor unit (A)
in water or any other liquid.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
Problems Causes Solutions
The appliance
does not work.
It is not plugged in. Plug the appliance in using a plug with the same
voltage.
The bowl (D) or the accessories
(E) and (F) are not correctly as-
sembled or positioned on the
motor unit (A).
Check that the bowl or accessories are cor-
rectly assembled; dismantle and start to assem-
ble again (Fig 2.a, 2.b and 2.c) and check that
they are far down enough on the motor unit.
Maintain pressure on the accessory lid (E) or (F)
during operation.
Excessive vibra-
tion.
The appliance is not on a flat,
stable surface.
Put the appliance on a flat surface.
Volume of ingredients is too high. Reduce the quantity of ingredients processed.
Error in assembling the accesso-
ries.
Check that the bowls (E4) (F4) are correctly as-
sembled with the blade units (E2) (F2) associa-
ted with them, the coloured markers should be
identical.
Leak through lid.
Volume of ingredients is too high. Reduce the quantity of ingredients processed.
The lid is not fitted correctly. Check that the seal is in place (D5) on the lid
(D6). Correctly position the lid (D6) on the bowl
(D). Lock the button (D7).
Leak from the
bowl or accesso-
ries
Incorrect positioning of the seal
on the blade unit (D1)(E1)(F1).
Make sure that the seal is correctly positioned,
the lips of the seal should be visible and it
should not be buckled (fig1). Handle the
blade units (D1), (E1), (F1) with care be-
cause the blades are sharp.
The blade unit (D1)(E1)(F1) is in-
sufficiently or incorrectly locked
on the bowl (D4)(E4)(F4).
Make sure that the blade unit and the bowl are
fitted together correctly be pressing at the top
of the button (D2)(fig2c) or on the buttons
(E2)(F2) (fig5c)
The blade does
not rotate easily.
Pieces of food that are too big or
too hard.
Reduce the size or quantity of the ingredients
processed.
Add liquid to the bowl mix without exceeding
the maximum level.
To Next Page
Loading...
