To Next Page
K
Kevin JohnsonSep 12, 2025
Why is the pump on my Krups Coffee Maker so noisy?
- ZznormanSep 12, 2025
If the pump is abnormally noisy, there may be no water in the tank. Fill the water tank and restart the pump. Avoid emptying the tank completely.
Why is the pump on my Krups Coffee Maker so noisy?
If the pump is abnormally noisy, there may be no water in the tank. Fill the water tank and restart the pump. Avoid emptying the tank completely.
Why is the foam nozzle on my Krups Coffee Maker not working properly?
If the nozzle on your Krups Coffee Maker isn't working or produces little foam, the foam nozzle might not be correctly installed. Check that the accessory is correctly mounted on the appliance: remove then re-install it on the hinged arm using a firm upward movement. Also, the milk might be too hot; use fresh, pasteurised or UHT milk that has been recently opened.
Why does my Krups Pump espresso espresso taste bad?
If your espresso tastes bad, it could be that after descaling, the rinsing cycle was not carried out correctly. Rinse the appliance in line with the user instructions and check the quality of the coffee.
General| Brand | Krups |
|---|---|
| Type | Espresso Machine |
| Pressure | 15 bars |
| Material | Plastic |
| Pump Pressure | 15 bars |
Key safety precautions for appliance use to prevent fire, shock, or injury.
Advice on using power cords safely to avoid entanglement or tripping hazards.
Identifies external components of the espresso machine via labels A through K.
Explains the functions of the control panel buttons, lights, and thumb wheel.
Procedure to rinse the espresso system with hot water before initial coffee preparation.
Instructions on preparing espresso using ground coffee, including tamping and filter use.
Steps for frothing milk to make cappuccinos, including nozzle positioning and milk type.
Instructions for cleaning the exterior, water tank, drip tray, and filter holder seal.
Guidance on how often to descale based on water hardness and usage frequency.
Detailed steps for descaling the coffee brewing system using a vinegar or acid solution.
Identifies causes and solutions for moist coffee, such as insufficient coffee grounds.
Addresses issues with slow espresso flow, including grind fineness and filter holder cleanliness.
Troubleshooting steps for when the machine fails to operate, checking water levels and connections.
