English
5
ESPRESSO
TIPS
n For an intensely aromatic espresso, we recommend that you use freshly ground special espresso
coffee which is ideal for preparing this type of delicate beverage, as well as cups with a capacity not
exceeding 50 ml.
n Keep the ground coffee in the refrigerator to preserve its aroma longer.
n Do not fill your filter holder to the brim, but use the measuring spoon (1 cup = 1 spoon –2 cups =
2 spoons) (Fig. 5).
n If you do not use the appliance for more than 5 days, rinse and drain the water tank.
n Always remember to turn off the appliance before removing the tank to fill or empty it.
n Make sure you always place the appliance on a flat stable surface.
n To obtain an espresso at exactly the right temperature, we recommend that you preheat your cups.
n To prolong the service life of your appliance, we recommend that you always use a Claris Aqua Filter
System cartridge (reference: F088) and that you descale the appliance at regular intervals.
IMPORTANT!
Before using for the first use, after a prolonged period of inactivity or after descaling,
the appliance must be cleaned as described in paragraph 1: "BEFORE FIRST USE".
Before using your espresso machine, clean all the accessories in soapy water and dry them.
A. SETTING THE TIME (to be done on first use and after a power cut)
n Your XP2280 combo machine has a display making it easy to use and providing a wide range of
settings.
n You must set the clock when you plug in your appliance for the first time or after a power cut.
n You can set the clock in European (24-hour clock) or American (AM-PM) display mode.
n To do this, simultaneously press the "H" and "m" buttons below the display.
n Then set the hours by pressing the "H" button and the minutes by pressing the "m" button.
Make sure the steam knob on the left of the appliance is in 0 position.
If you are not using the Claris cartridge, go directly to paragraph "C. RINSING YOUR
APPLIANCE".
B. INSTALLING THE CLARIS CARTRIDGE (to be done every time the cartridge is replaced)
n Screw the Claris cartridge into the bottom of the tank.
n Fill the tank with water (Fig. 2).
n Replace the tank by positioning it firmly to ensure that water can enter and then close the lid (Fig. 3).
n Place a container under the steam nozzle.
n Turn on the appliance by pressing the button (fig.4).
n As soon as the appliance reaches the right temperature, the LED glows steadily and the
pictograms and are displayed.
n Turn the knob on the side of the appliance to (fig.13).
n At the start, steam will come out through the steam nozzle and the four pictograms in the display and
the LED will begin to flash.
n Turn the knob to "0" position (fig.15).
n Turn off the machine and then turn it on again by pressing the button twice.
n Return to knob to : position: water flows out of the steam nozzle. If water does not flow from the
nozzle, repeat the operation from the start 1 or 2 times.
Espresso
Espresso
Espresso
1. BEFORE FIRST USE
Espresso
KR_XP2280_NAFTA_NC00026071-01 17/11/11 17:55 Page5
To Next Page
Loading...
Need help?
General
