EasyManua.ls Logo

Krups XP320830 - Troubleshooting

Krups XP320830
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
TROUBLESHOOTING
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The coffee is very moist. You have not used enough
coffee.
Add more coffee.
The espresso ows too
slowly.
The coffee is too ne, too
coarse or too mealy.
Choose slightly larger
coffee grounds.
The lter holder is dirty. Clean your lter holder
using the instructions in the
section: CLEANING AND
MAINTENANCE - B. Filter
holder. Clean the coffee
lter as well.
The head of the lter holder
is clogged.
When the appliance has
cooled, clean the grill
through which the water
ows using a damp sponge.
Your machine is calcied. Descale your machine
following the user
instructions provided.
There is too much coffee. Observe the maximum
limits when lling the lter.
A continuous ow of water
pours from the lter holder
after making an espresso.
Your machine is becoming
calcied because the water
is particularly hard.
Descale your machine
immediately following the
user instructions provided.
The red cap was not
removed.
Remove the red cap.
A continuous ow of water
pours from the lter holder
after making an espresso.
Your machine is becoming
calcied because the water
is particularly hard.
Descale your machine
immediately following the
user instructions provided.
Coffee grounds are present
in the cup.
The lter holder is clogged. Clean the lter holder using
hot water.
The coffee grounds are too
ne.
Use slightly larger coffee
grounds.
The seal on the head of the
lter holder is clogged.
Clean the lter holder
and the seal with a damp
sponge.

Table of Contents

Related product manuals