English
22
RINSING
IMPORTANT!
After descaling, rinse 2-3 times with clean water as
described in Section 4 “BEFORE FIRST USE”.
Then rinse the steam nozzle by following the instructions
below:
n Fill the water tank with clean water. Then place a container under the
steam nozzle.
n Press the button to turn the machine on, and then immediately
turn the dial to the position, without stopping at the position.
n Let the wa
ter run through the nozzle until steam appears.
n Turn the dial back to the position.
n The machine is now descaled and ready to be used again.
To Next Page
Loading...
Need help?
General
