Krushr F86/024 - Door Installation

US/Can
11
Door installation
Step 1
Krüshr stainless
steel doors are
supplied with
predrilled holes.
For other
furniture doors
you are required
to drill the screw
holes into the
door according to
the position as
illustrated in Dia.
A detailed hole
position template
can be found in
“Door Mounting
Guide” on
page 17.
WARNING
Take great care NOT to drill right through the door. All models will accommodate
either a Krüshr stainless steel door or other furniture door. For furniture doors
with panels it would be advisable to add an additional wood panel to the rear of
the door to provide additional strength.
2 X Handle mount holes
(S model only)
4 x Door mount holes
(not ‘through’ holes)
2 x Base mount holes
(not ‘through’ holes)
Dia.1