Need help?Do you have a question about the KSB 4K Series and is the answer not in the manual?
General| Type | Centrifugal Pump |
|---|---|
| Material | Stainless Steel, Cast Iron |
| Impeller Type | Closed |
| Shaft Seal | Mechanical seal |
| Connection Type | Flange |
| Speed | 2900 rpm |
Manual validity, purpose, and contact information.
Identifies intended users and lists related technical documentation.
Explains symbols used throughout the document for clarity and navigation.
Defines critical safety symbols and their meanings.
General safety information and compliance requirements for the manual.
Specifies the correct operational parameters and restrictions for the product.
Outlines necessary qualifications and training for personnel.
Details the risks and consequences of not following the manual.
Lists essential safety regulations to be observed alongside manual instructions.
Provides safety guidelines for personnel operating the equipment.
Safety advice for personnel performing maintenance, inspection, and installation.
Warns against operating the seal outside specified limits.
Procedures for inspecting the mechanical seal upon receipt.
Guidelines and precautions for transporting the mechanical seal.
Recommendations for proper storage to maintain seal integrity.
Instructions for safely returning the mechanical seal to the supplier.
Guidelines for the safe and legal disposal of the mechanical seal.
A brief overview of the KSB mechanical seal.
Explains the coding system used for identifying mechanical seal types.
Information on materials used in the mechanical seal construction.
Details about the mechanical seal's construction and configuration.
Describes the operational principles and how the seal functions.
Information on the flushing adapter for preventing deposits.
Lists approved lubricants, cleaning agents, and tools for installation.
Conditions and checks required before starting installation.
Step-by-step instructions for installing the mechanical seal.
Specific instructions for double seals and quench piping installation.
Procedures for verifying correct installation of the mechanical seal.
Step-by-step instructions for removing the mechanical seal.
Specific procedures for dismantling a double mechanical seal.
Specifies the correct tightening torques for various connections.
Critical safety guidelines to follow during product operation.
Explains leakage characteristics and factors influencing them.
Defines the permissible operating parameters for the mechanical seal.
Procedures and recommendations for routine maintenance and inspection.
Guidance on what to do in case of failure and who to contact for support.
Provides assembly drawings and component lists for the 4K mechanical seal.
Provides assembly drawings and component lists for the 4K tandem arrangement.
Provides assembly drawings and component lists for the 4KXW mechanical seal.
Provides assembly drawings and component lists for the 4KXW tandem arrangement.
Provides assembly drawings and component lists for the 4KD tandem arrangement.
To Next Page
