Need help?Do you have a question about the KSB PumpDrive 2 Eco and is the answer not in the manual?
Defines hazard symbols and signal words for risk awareness and prevention.
Addresses requirements for interference immunity and emissions for electronic equipment.
Provides detailed specifications for the inverter's electrical, environmental, and EMC characteristics.
Detailed safety regulations and information for planning the electrical connections.
Overview and description of the standard control panel's components and functions.
Guides on accessing and using the settings menu for basic configurations.
Guides on setting motor parameters, comparing with name plate data, and adjusting as needed.
Details the available motor control methods and their characteristics.
Explains the process and types of AMA for optimizing motor performance and efficiency.
Provides instructions on how to set the desired operating setpoint for the system.
Covers single-pump and multiple-pump operation modes, including open and closed-loop control.
Details various functions like aligning the inverter with the pump and protective features.
Details the functions and configuration of digital and analog I/O for controlling the inverter.
Critical safety warnings for all maintenance and service activities.
Comprehensive list of all parameters with their descriptions, settings, and factory defaults.
Provides a guide to identifying and resolving common faults and malfunctions.
Lists and explains various alert messages and their corresponding behaviors.
Details warning messages, their possible causes, and recommended remedies.
Manufacturer's declaration confirming product compliance with EU directives and standards.
Defines hazard symbols and signal words for risk awareness and prevention.
Addresses requirements for interference immunity and emissions for electronic equipment.
Provides detailed specifications for the inverter's electrical, environmental, and EMC characteristics.
Detailed safety regulations and information for planning the electrical connections.
Overview and description of the standard control panel's components and functions.
Guides on accessing and using the settings menu for basic configurations.
Guides on setting motor parameters, comparing with name plate data, and adjusting as needed.
Details the available motor control methods and their characteristics.
Explains the process and types of AMA for optimizing motor performance and efficiency.
Provides instructions on how to set the desired operating setpoint for the system.
Covers single-pump and multiple-pump operation modes, including open and closed-loop control.
Details various functions like aligning the inverter with the pump and protective features.
Details the functions and configuration of digital and analog I/O for controlling the inverter.
Critical safety warnings for all maintenance and service activities.
Comprehensive list of all parameters with their descriptions, settings, and factory defaults.
Provides a guide to identifying and resolving common faults and malfunctions.
Lists and explains various alert messages and their corresponding behaviors.
Details warning messages, their possible causes, and recommended remedies.
Manufacturer's declaration confirming product compliance with EU directives and standards.
General| Control mode | Sensorless vector control |
|---|---|
| Protection class | IP20 |
| Ambient temperature range | -10 °C to +50 °C |
| Frequency range | 50 Hz to 60 Hz |
| Communication interfaces | Modbus RTU |
To Next Page
