code R30021.110en www.kseniasecurity.com
ed.10/2020
ergo M & ergo S
Multifunction LCD keypads
Installation guide
INTRODUCTION
The “ergo” series keypads with Wide Dot Matrix LCD Display can control, program and manage Ksenia lares
4.0 control panels.
MAIN CHARACTERISTICS
• Display of system status;
• Display of functioning parameters (date/time, active GSM network, GSM level, etc);
• System commands (complete or partial arming, reset, activation of outputs terminals, phone calls, etc.);
• RFID Tag reading to arm and disarm the intrusion detection systems set up with the lares 4.0 devices.
• Full Programming of system parameters;
• Programming of local parameters (audio volume, backlight levels and LCD contrast);
• Touch sensitivity adjustment on 3 levels: high, medium, low. Average level of default (only for ergo S);
• Keypad functionality exclusion for front cleaning purposes (ergo S only);
• Remote Listening (ergo S only);
• Vocal messages recording.
QUANTITY DATA
lares 4.0 models wls 96 16 40 40 wls 140 wls 644 wls
Maximum number of User interfaces
(ergo S/M; volo; volo-in)
3 6 24 24 40 64
To Next Page
Need help?
General
