ENGLISH
ASTRO – BXTW12N
Wireless headphones – User manual
Technical specifications
Playtime: 7 hours
Battery: 150 mAh
Frequency range: 20 Hz - 20 kHz
Protection rating: IP64 (sweat and splash proof)
Operation range: 10 meters
Wireless frequency range: 2402-2480 GHz
Technology: Bone conduction
Sensitivity: 105 dB
Impedance: 32 Ω
Charging time: 1,5 hours
Weight: 26 g
Material: ABS
In the box
1 x Headphones
1 x USB-A to USB-C cable (30 cm)
2 x Ear foam
Product details
Headphones with
touch control, LED
indicator, microphone
and USB-C port
Headphones LED indicators
The headphones LED indicator informs about the state of
the connection, among other aspects:
An intermittent blue and red light
will flash until the headphones are
paired.
A blue light will flash every 5
seconds.
A blue and red light will show once.
A red light will show for 2 seconds
and then no light will show.
A fixed red light will show while
charging. When they are fully
charged a fixed blue light will show.
Turn on/off the headphones
To turn on the headphones tap the touch control for 2
seconds. To turn them off, do the tap the touch control for 6
seconds.
How to pair the headphones
Activate the Bluetooth on your device, search for KSIX
ASTRO on the available devices list and select it. Once the
connection has been successful, you will hear the word
“Connected”. Once the headphones have been connected
to a device, they will pair automatically when turned on.
To Next Page
Need help?
General
