2.2 Signal Cable Connection
Connect the signal cable to the HDMI or DP signal output port on the PC,then connect the other end of the
signal cable to the corresponding signal input port on the LCD.
2.3 Headset Connection
After connecting the headset, there will be audio output,
and it also supports external loudspeakers.
2.4 Upgrade through USB
The USB port is only used to update display firmware from
a USB mobile device. DOnot insert any other devices.
3.Display Operation
use
HDMI
Thejoystick is shown as in the figure. For the models of the some series, only the key positions and the frame
styles are different. Refer to the actual situation for details.
Power indicator
Joystick
4
To Next Page
Loading...