4.Simple Problems Disposal
I.BIank screen /Power indicator
does not work
2.Blurred too large or too small images
3.Dark screen
4.DispIay overheating
5.Dork/light spots when powered on
6.1mage distortion, flashing, shaking
7.N0isy signal when powered off
Symptoms
86kPo
Disposal Methods
Check whether the power supply is in good contact with the
display and the power socket; and check whether the display
is turned off.
Goto the "Image Settings" category menu and select "Image
Auto Adjust" to make the monitor adjust automatically to
correct. (Only available for monitors with VGA)
Enter the "Brightness & contrast" menu to regulate the
contrast and the brightness of the display.
Leave at least 5cm of ventilated space around the display.
DOnot ploce articles on the display.
It is normal. Because of the temperature difference in the
environment, the backlit tube emits uneven light at the initial
stage after the display turns on. However, the backlit tube will
emit normal light after 20 minutes, and the dark/light spots
will be eliminated at that time.
Check your computer configuration, choose the correct
resolution, and reset your refresh rote.
During the power-off of the display, there may be some noisy
signals on the screen caused by the normal discharge.
5. Product Technical Specifications
Panel Dimension
Best Operating Resolution Ratio
Input Voltage
Contrast
Visible Area
Pitch size for wall mount
Maximum elevation
Working condition
Storage condition
Pocking Dimension (WxHxD) and Weight
Display Dimension (WxHxD) (excluding base)
Pocking Dimension (WxHxD)
Net Weight of Display (including base)
Packing weight
31.5"
2560x1440 @ 165Hz
OC lgv / 3.42A
3500: 1 (TYP)
697.344mm x 392.256mm
100mmxIOOmm
5000m
Temperature :
Atmosphere :
Temperature :
Atmosphere :
Humidity :
60 C Humidity :
104kPo
20%
10%
85%
-10 c
86kPa
711xa22x106mm
790x535x170mm
6.0Kg
7.9Kg
6
To Next Page
Loading...