Mounting Location
10cm
Install on the wall
10cm
10cm
Install on the base
30cm
10cm
10cm
Ventilation
1Ocm
Ventilation is affected Ventilation is affected
Please leave the space around the display with the size at
least shown in the figure.
Do not cover the ventilation holes or insert anything
Wall
into the shell.
Unless there ore proper ventilation conditions ond
adequate ventilation space around the display, do not
place the display within a limited space, such as a book
cabinet or a built-in closet.
Installation Guide
-The display should be installed near an AC power socket that can be easily pluggable.
-It is recommended to use suitable wall mount brackets or a base for safety purpose.
-To prevent injury, the display should be placed on a smooth horizontal plane, or fixed on a firm wall.
Wall
-If you need to install it on a wall, it should be done by professional technicians. The improper display installation may cause
instability.
-Do not ploce the display where it may be suffered from mechanical vibration.
-Do not ploce the display where insects may enter.
-Do not place the display directly facing an air conditioner, or the internal panel may condense, leading to faults.
-Do not place the display where there is a strong electromagnetic field, or it will be interfered with and damaged by the
electromagnetic waves.
Safety Protection
When the PC video signal exceeds the frequency range of the display, the display will disable the line
and field synchronizing signals to protect the display. Under this circumstance, you must set the
output frequency of the PC to an acceptable range for the display to work properly.
Power Management System
Mode
Normal Operation
Standby
Power Consumption
Remarl<: All technical specifications in the User Guide and on the
external packing are allowed to change without prior notice.
If there is o subtle difference between the User Guide and the
actual operation, the latter shall prevail.
so.5W
To Next Page
Loading...