Need help?Do you have a question about the KTM 250 XC?W USA 2010 and is the answer not in the manual?
General| Engine Type | Single-cylinder, 2-stroke |
|---|---|
| Displacement | 249 cc |
| Bore x Stroke | 66.4 mm x 72 mm |
| Transmission | 6-speed |
| Starter | Kickstarter |
| Front Suspension | WP USD 48 mm |
| Rear Suspension | WP PDS shock absorber |
| Fuel System | Carburetor |
| Front Brake | Single disc |
| Rear Brake | Single disc |
Defines intended use for EXC/SIX DAYS and XC-W/XC models.
Covers maintenance prerequisites and warranty conditions.
Advises on safety, spare parts, and work rules.
Highlights fire hazards, environmental impact, and risk grades.
Identifies key components from front-left and rear-right perspectives.
Locates chassis, type, key, engine, and part numbers.
Explains clutch, brake levers, throttle, and short circuit button.
Details emergency off, starter, light, horn, and turn signal switches.
Describes the function of indicator lamps.
Covers speedometer activation, testing, and setting options.
Details various display modes like speed, lap, odometer, and service hours.
Explains fuel tap states and choke lever function.
Describes shift lever positions and kickstarter usage.
Covers foot brake lever and side stand operation.
Details the operation of the steering lock.
Provides essential safety and operational advice for new riders.
Covers engine break-in and preparing for varied riding conditions.
Guides on preparing for dry sand, wet sand, and muddy surfaces.
Prepares for riding in hot weather, low temperatures, and snowy conditions.
Lists vital checks and safe starting methods.
Explains proper riding, gear shifting, and braking techniques.
Details safe stopping, parking, and refueling practices.
Lists maintenance tasks for authorized KTM workshops.
Outlines essential maintenance tasks for the owner to perform.
Covers basic chassis settings and suspension adjustments.
Details compression, rebound damping, and spring preload adjustments.
Explains fork damping, spring preload, and leg maintenance.
Covers steering head bearing play and handlebar position adjustment.
Explains chain tension, brake disc checks, and lever free travel.
Details brake fluid level checks and lining maintenance.
Details wheel removal/installation and tire condition checks.
Covers coolant procedures and main silencer maintenance.
Covers clutch lever adjustment and hydraulic fluid changes.
Details carburetor idle adjustment and gear oil procedures.
Lists detailed engine specifications for all models.
States the required capacities for engine oil and coolant.
Provides essential engine component tightening torque values.
Lists specific carburetor settings for each model.
Provides detailed carburetor jetting configurations based on altitude and temperature.
Details chassis dimensions, suspension travel, weights, and loads.
Lists specifications for lighting, tires, and fuel capacity.
Lists fork settings, spring rates, and oil for all models.
Lists shock absorber settings, spring rates, and sag for all models.
Provides essential chassis component tightening torque values.
Shows electrical wiring diagrams for different motorcycle model groups.
Details specifications for brake fluid, coolant, engine oil, and fork oil.
Specifies shock absorber oil and fuel mixture ratios.
Lists recommended cleaners, greases, and sprays for maintenance.
Details the use of universal oil spray.
Explains JASO and SAE standards relevant to oils and fluids.
To Next Page
