EasyManua.ls Logo

KTM 250 XC-W US 2024 User Manual

KTM 250 XC-W US 2024
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SETUP INSTRUCTIONS 2024
250 EXC
250 EXC SIX DAYS
250 XCW
300 EXC
300 EXC SIX DAYS
300 XC-W
300 EXC HARDENDURO
300 XC-W HARDENDURO
Art. no. 3214968en
Question and Answer IconNeed help?

Do you have a question about the KTM 250 XC-W US 2024 and is the answer not in the manual?

KTM 250 XC-W US 2024 Specifications

General IconGeneral
Engine Type1-cylinder, 2-stroke engine
Displacement249 cm³
Bore x Stroke66.4 mm x 72 mm
StarterElectric starter
Transmission6-speed
CoolingLiquid cooled
Fuel SystemKeihin carburetor
Front BrakeDisc brake
Rear BrakeDisc brake, 220 mm
FrameChromium Molybdenum Steel

Summary

Setup

Transport Mode

Instructions on enabling the vehicle's electronics after transport mode.

Unpacking and Setting Up Vehicle

Step-by-step guide for unpacking the motorcycle and initial setup.

Footrest Installation

Steps for mounting the right footrest and pin, including spring engagement.

Left Footrest Installation

Steps for mounting the left footrest and pin, including spring engagement.

Final Vehicle Preparation

Final checks and preparations before vehicle handover to the customer.

Work

Fuel Tank Removal

Procedures for safely removing the fuel tank, including safety warnings.

Fuel Tank Installation

Instructions for installing the fuel tank, including checks and safety.

12-V Battery Removal and Charging

Steps for removing the 12-V battery and instructions for charging it.

12-V Battery Installation

Procedures for installing the 12-V battery into the compartment.

Headlight Mask Operations

Procedures for removing and installing the headlight mask and headlight.

Headlight Setting Adjustment

How to check and adjust the headlight range and beam pattern.

Refueling Procedure

Instructions and safety precautions for refueling the motorcycle.

Technical Specifications

Related product manuals