KTM 300 XC-W US 2024 - User Manual

SETUP INSTRUCTIONS 2024
250 EXC
250 EXC SIX DAYS
250 XC‑W
300 EXC
300 EXC SIX DAYS
300 XC-W
300 EXC HARDENDURO
300 XC-W HARDENDURO
Art. no. 3214968en

Summary

Setup

Unpacking and Initial Setup

Steps for unpacking the vehicle and initial setup.

Triple Clamp Installation (EXC Models)

Steps for installing the triple clamp on standard EXC models.

Triple Clamp Installation (SIX DAYS;HARDENDURO Models)

Steps for installing triple clamp on SIX DAYS/HARDENDURO models.

Handlebar Support Installation

Procedures for mounting and tightening the handlebar support.

Combination Switch and Turn Signal Installation

Steps for mounting combination and turn signal switches.

Fender, 12-V Battery, and Seat Installation

Covers installation of front fender, 12-V battery, and seat.

Turn Signal Wiring and Connection

License Plate Holder and Tail Light Assembly

Tail Light and Fender Mounting

Footrest Installation

Footrest Spring and Pin Installation

Work

Seat Mounting and Fuel Tank Removal

Fuel Tank Installation

Procedures for installing the fuel tank.

Throttle Cable Routing Check

Fuel Tank Installation Continuation

Further steps for installing the fuel tank.

12-V Battery Removal

Steps for safely removing the 12-V battery.

12-V Battery Removal Continuation

Final steps for removing the 12-V battery.

Charging the 12-V Battery

Detailed instructions for charging the 12-V battery.

12-V Battery Charging (300 EXC BR)

Specific instructions for charging the 12-V battery on 300 EXC BR models.

Installing the 12-V Battery

Battery Cable Connections

Front Fender and Headlight Mask Removal

Headlight Mask Installation

Headlight Setting Check and Adjustment

2-Stroke Oil Addition and Fuel Filler Cap

Fuel Filler Cap Closing and Refueling

Technical Specifications

Chassis Tightening Torques

List of torque specifications for chassis components.

KTM 300 XC-W US 2024 Specifications