KTM 390 Duke 2016 User Manual

7 PREPARING FOR USE 57
– Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the Service and Warranty Booklet at vehicle handover.
– Before your first trip, read the entire operating instructions carefully.
– Get to know the controls.
– Get used to handling the motorcycle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible to get
a better feel for the vehicle.
– Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
– Run the engine in. ( p. 57)
7.2 Running in the engine
– During the running-in phase, do not exceed the specified engine speed.
Guideline
Maximum engine speed
During the first: 1,000 km (620 mi) 7,500 rpm
Tip
During the running-in phase, set the shift warning light to the specified engine speed.
– Adjust the shift speed RPM 1. ( p. 48)
– Adjust the shift speed RPM 2. ( p. 49)
– Avoid fully opening the throttle!

KTM 390 Duke 2016 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	373.2 cc
Transmission	6-speed
Cooling System	Liquid cooled
Front Suspension	WP upside-down Ø 43 mm
Rear Suspension	WP monoshock
Seat Height	800 mm
Dry Weight	149 kg
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Frame	Steel trellis frame, powder coated
Front Tire	110/70 ZR 17
Rear Tire	150/60 ZR 17
Ground Clearance	170 mm
Torque	35 Nm
Fuel System	Electronic Fuel Injection
Front Brake	300 mm disc
Rear Brake	230 mm disc
ABS	Bosch 9MB Two Channel ABS
Fuel Tank Capacity	11 liters