KTM 450 SX-F 2024 User Manual

3 WORK
14
F03724-01
– Position the brake disc guard.
H04987-11
–
Mount and tighten screw
2
.
Guideline
Screw, front wheel
spindle
M20x1.5 35 Nm
(25.8 lbf ft)
– Operate the hand brake lever several times until the brake
linings are seated correctly against the brake disc.
– Remove the motorcycle from the lift stand. ( p. 10)
– Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws
3
.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
3.5 Installing the front fender
S05339-10
Main work
–
Position the front fender. Mount and tighten screws
1
and
2
.
Guideline
Screw, fender M6 12 Nm (8.9 lbf ft)

KTM 450 SX-F 2024 Specifications

General

Displacement	449.9 cc
Bore x Stroke	95 mm x 63.4 mm
Compression Ratio	13.1:1
Starter	Electric starter
Transmission	5-speed
Fuel System	Keihin EFI, throttle body 44 mm
Ignition	Keihin EMS
Final Drive	520 chain
Cooling	Liquid cooled
Frame	Central Double-Cradle Type 25CrMo4 Steel
Front Suspension	WP XACT-USD, Ø 48 mm
Rear Suspension	WP XACT Monoshock with linkage
Front Tire	80/100-21
Fuel Tank Capacity	7.2 liters
Engine Type	Single Cylinder, 4-Stroke
Front Brake	260 mm
Rear Brake	220 mm
Rear Tire	120/90-19
Seat Height	958 mm
Ground Clearance	370 mm
Wheelbase	1, 485 mm ± 10 mm